Single Turbo LS1 Notch Build *videos*
06-06-2010, 10:31 AM
#101
iron block is 80 more then a aluminum, turbo is 40lbs, intercooler is 20. threw floow frame connectors. another set under the car. turbo merge pipe. any ways turd went 11.3 at 121 with 1/8th was 7.3 at 95 i think.... the 1.78 60ft on 4lbs. da of +2200ft it does not have enough power to turn the 3.73/28" in 3rd gear its only gaining 25 on the back half. im not launching on boost. just stalling to 3k. i might try a 26" tire or ill just turn the power up.
Dont let it get away from you, its a wild ride going those 1.7sTurn the power up. Turbo cars with no turbo make the suck At least mine does
06-06-2010, 09:00 PM
#103
11 Second Club
Thread Starter
iTrader: (17)
Join Date: Mar 2005
Location: Maryland
Posts: 4,796
Likes: 0
Received 0 Likes
on
0 Posts
should of said i also had an exhaust leak, got one in oc racing another stang, got home and tightened the bolts all back down. well at the track the 1st pass the leak came back. changed the exhaust gaskets today. percy's xxx exhaust gastets suck!
06-06-2010, 11:08 PM
#104
12 Second Club
iTrader: (1)
Join Date: Jul 2002
Location: Midland, Tx
Posts: 621
Likes: 0
Received 0 Likes
on
0 Posts
Looks great man!
I'm getting ready to build a 92 coupe with a turbo LS1 for my local 275 drag radial class.
What does your fuel system consist of? What is your intercooler rated for hp wise? Class rules state I must run an air to air so i'm wanting one that will support 1200+ hp LOL.
I'm getting ready to build a 92 coupe with a turbo LS1 for my local 275 drag radial class.
What does your fuel system consist of? What is your intercooler rated for hp wise? Class rules state I must run an air to air so i'm wanting one that will support 1200+ hp LOL.
06-07-2010, 05:03 PM
#105
11 Second Club
Thread Starter
iTrader: (17)
Join Date: Mar 2005
Location: Maryland
Posts: 4,796
Likes: 0
Received 0 Likes
on
0 Posts
magnafuel 625 pump. -8 an lines. rc750cc injectors.
the intercooler is a 31x12x4 off ebay. you should think about using meth to help with iat's. i am
the intercooler is a 31x12x4 off ebay. you should think about using meth to help with iat's. i am
06-08-2010, 12:03 AM
#106
12 Second Club
iTrader: (1)
Join Date: Jul 2002
Location: Midland, Tx
Posts: 621
Likes: 0
Received 0 Likes
on
0 Posts
)I was thinking about getting two 3 inch A2A cores and welding them together and fabbing up some tank ends. Seeing as you have a 4 inch thick intercooler now, do you think one that is 6 inches thick would fit?
06-08-2010, 02:13 PM
#111
11 Second Club
Thread Starter
iTrader: (17)
Join Date: Mar 2005
Location: Maryland
Posts: 4,796
Likes: 0
Received 0 Likes
on
0 Posts
yea ill see how long these felpro's last. frost did you see the 1/4 and trap speeds. i dont think it has the power to pull threw 3rd. want to try a 26" tire
i got a manuel boost controler (might take it to 8lbs)
also i got a lpe 2 step, so that and the trans brake will be hooked up shortly
i got a manuel boost controler (might take it to 8lbs)
also i got a lpe 2 step, so that and the trans brake will be hooked up shortly
06-12-2010, 03:59 PM
#113
11 Second Club
Thread Starter
iTrader: (17)
Join Date: Mar 2005
Location: Maryland
Posts: 4,796
Likes: 0
Received 0 Likes
on
0 Posts
they are rc 750cc. right now im working on getting a manuel boost controler so i can run 13lbs. but not sure how to hook it up.
also got a lpe 2 step at 3k it will only build 1/2 lb boost. how do you turbo guys get it up higher?
scratch the 26" tire idea, im sticking with 28s with 13lbs it will run out with the 26s
also got a lpe 2 step at 3k it will only build 1/2 lb boost. how do you turbo guys get it up higher?
scratch the 26" tire idea, im sticking with 28s with 13lbs it will run out with the 26s
06-15-2010, 10:23 PM
#115
11 Second Club
Thread Starter
iTrader: (17)
Join Date: Mar 2005
Location: Maryland
Posts: 4,796
Likes: 0
Received 0 Likes
on
0 Posts
you and jesse are the only two.
3-4 lbs boost is fun with the 600s wonder how it will do with 13 lbs when the turbo starts becoming efficiant.
3-4 lbs boost is fun with the 600s wonder how it will do with 13 lbs when the turbo starts becoming efficiant.
06-16-2010, 12:52 PM
#116
Launching!
iTrader: (24)
Join Date: Mar 2010
Location: Miami, FL
Posts: 259
Likes: 0
Received 0 Likes
on
0 Posts
they are rc 750cc. right now im working on getting a manuel boost controler so i can run 13lbs. but not sure how to hook it up.
also got a lpe 2 step at 3k it will only build 1/2 lb boost. how do you turbo guys get it up higher?
scratch the 26" tire idea, im sticking with 28s with 13lbs it will run out with the 26s
also got a lpe 2 step at 3k it will only build 1/2 lb boost. how do you turbo guys get it up higher?
scratch the 26" tire idea, im sticking with 28s with 13lbs it will run out with the 26s
