headers for 72 Nova
#1
headers for 72 Nova
I just wanted to get some ideas for headers. What have people used and where did the get them? I have done some searching, but want some more input. I am looking for buget friendly. So tell me what you've used in your Nova or 1st gen Camaro/Firebird.
Thanks
Thanks
#3
dynatech
i just got off the phone with them. depending on how much power, they have new headers that are going to start shipping next week for 399. they are 1-7/8 with 3 inch collector . part # 115-91140030c
#6
I used the Carshop 1" setback plates. It puts the trans in the stock location so you can use the factory trans crossmember and driveshaft if you want. My car had PS but I did change over to a manual gearbox. The headers literally drop right in. Even the drivers side fits through the top around the gearbox.
#7
I used the Carshop 1" setback plates. It puts the trans in the stock location so you can use the factory trans crossmember and driveshaft if you want. My car had PS but I did change over to a manual gearbox. The headers literally drop right in. Even the drivers side fits through the top around the gearbox.
Trending Topics
#10
I have been down the road your going down now as mine is done. I am cheap and got the non coated ones....they just come painted black. They have been on my car a year now and still look good.....no issues at all. If you have any questions/problems at all...feel free to send me a PM.
#11
I have been down the road your going down now as mine is done. I am cheap and got the non coated ones....they just come painted black. They have been on my car a year now and still look good.....no issues at all. If you have any questions/problems at all...feel free to send me a PM.
#12
You can save a few bucks buy calling Summit or Jegs and giving them this site.
http://www.exoticperformanceplus.com...html?item=1405
They have the headers for 509.99 and Jegs or Summit will beat that price. That what I did.
http://www.exoticperformanceplus.com...html?item=1405
They have the headers for 509.99 and Jegs or Summit will beat that price. That what I did.
#13
You can save a few bucks buy calling Summit or Jegs and giving them this site.
http://www.exoticperformanceplus.com...html?item=1405
They have the headers for 509.99 and Jegs or Summit will beat that price. That what I did.
http://www.exoticperformanceplus.com...html?item=1405
They have the headers for 509.99 and Jegs or Summit will beat that price. That what I did.
#14
Just an FYI, it looks like retolsx has a stainless set of headers coming out in the next few months, and they might be around $600. Not too bad. I think I am going to wait and see the actual price and try these out.
#16
#17
here is a pic from Doug's website. this is a pic of there coated swap headers.
http://www.shopatron.com/products/pr...37-R/591.0.1.1
Hopefully the guy from ebay is the real deal.https://ls1tech.com/forums/images/icons/icon7.gif
http://www.shopatron.com/products/pr...37-R/591.0.1.1
Hopefully the guy from ebay is the real deal.https://ls1tech.com/forums/images/icons/icon7.gif
#18
here is a pic from Doug's website. this is a pic of there coated swap headers.
http://www.shopatron.com/products/pr...37-R/591.0.1.1
Hopefully the guy from ebay is the real deal.https://ls1tech.com/forums/images/icons/icon7.gif
http://www.shopatron.com/products/pr...37-R/591.0.1.1
Hopefully the guy from ebay is the real deal.https://ls1tech.com/forums/images/icons/icon7.gif
#20
Depending on how much power you're trying to make and how low you want to go, Speedway Motors has nice looking set of shorty headers they sell coated or uncoated. I'm planning on getting them because I'm more worried about ground clearance than dyno numbers.