conversion harness?

Reply Subscribe

Thread Tools

Search this Thread

Mar 25, 2010 | 03:18 PM

#21

brad22486

Thread Starter

Teching In

iTrader: (2)

Joined: Oct 2006

Posts: 45

Likes: 0

From: columbus, ohio

Ok now to doing the fuse thing. what all wires go to a fuse block, is there wires that go from the pcm to a fuse? stuff like that. and if i were to go to a junk yard what vehicle would i be able to take a fuse box out of and use?

Mar 25, 2010 | 07:04 PM

#22

Pocket

TECH Addict

iTrader: (22)

Joined: Apr 2009

Posts: 2,657

Likes: 149

From: NC

Pretty much anything EFI with two INJ fuses

The PCM shares it main IGN fuse with the MAF and has a separate batt 12v constant fuse which is shared with the fuel pump relay

Mar 26, 2010 | 12:29 PM

#23

brad22486

Thread Starter

Teching In

iTrader: (2)

Joined: Oct 2006

Posts: 45

Likes: 0

From: columbus, ohio

ok i got a fuse block out of a lt1 z28 will that work?

Mar 26, 2010 | 12:47 PM

#24

the_merv

11 Second Club

iTrader: (88)

Joined: Mar 2006

Posts: 21,019

Likes: 893

From: The Beach...

They work good..that's what I'm using. I have 8 Fuses and 3 Relays running everything Engine related.

Mar 26, 2010 | 12:56 PM

#25

brad22486

Thread Starter

Teching In

iTrader: (2)

Joined: Oct 2006

Posts: 45

Likes: 0

From: columbus, ohio

k sweet got it for 13 bucks so im glad its gonna work

Mar 28, 2010 | 08:58 AM

#26

brad22486

Thread Starter

Teching In

iTrader: (2)

Joined: Oct 2006

Posts: 45

Likes: 0

From: columbus, ohio

does anyone have a pic of the lt1 fuse box and a description of what they do. and tell me what wires go where to it

Mar 28, 2010 | 09:02 AM

#27

y2k_ta

'Bird Director

iTrader: (80)

Joined: Dec 2001

Posts: 12,829

Likes: 30

From: Central Indiana Honors: 4th grade spelling bee contestant

Speartech Fuel Injection Systems (site sponsor)
http://www.speartech.com
Phone number: 765-378-4908
3574 East State Road 236
Anderson, IN 46017

There's also Tech Rods out of Texas (not a site sponsor)

Mar 28, 2010 | 09:04 AM

#28

the_merv

11 Second Club

iTrader: (88)

Joined: Mar 2006

Posts: 21,019

Likes: 893

From: The Beach...

What do you mean..if you are adapting it then you will have to kinda wire it yourself. I re-wired my whole Fuse Box to run everything of mine.

LS1 Tech Stories

The Best V8 Stories One Small Block at Time

Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?

Pouria Savadkouei

Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine

Verdad Gallardo

7 Most Reliable High-Performance Engines GM Has Ever Built

Verdad Gallardo

Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin

Verdad Gallardo

6 Common C5 Corvette Failures and What's Involved In Repairing Them

Pouria Savadkouei

Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph

Verdad Gallardo

Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked

Pouria Savadkouei

Top 10 Most Powerful Chevy Trucks Ever Made!

Hennessey's New Supercharged Silverado ZR2 Has 700 HP

Verdad Gallardo

Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes

Verdad Gallardo

Mar 28, 2010 | 12:05 PM

#29

brad22486

Thread Starter

Teching In

iTrader: (2)

Joined: Oct 2006

Posts: 45

Likes: 0

From: columbus, ohio

ok do i run the pink from the injectors to the relays? im confused cause ive never done this and i dont know what wires to run to what fuses that kind of stuff

Mar 28, 2010 | 01:35 PM

#30

Pocket

TECH Addict

iTrader: (22)

Joined: Apr 2009

Posts: 2,657

Likes: 149

From: NC

12v IGN side of the injector connectors go to the fuse block

Mar 28, 2010 | 01:58 PM

#31

brad22486

Thread Starter

Teching In

iTrader: (2)

Joined: Oct 2006

Posts: 45

Likes: 0

From: columbus, ohio

u wouldnt b able to send me a diagram for it would u i have to c it done to be able to do it thats how stupid i am at this

Mar 28, 2010 | 09:41 PM

#32

Pocket

TECH Addict

iTrader: (22)

Joined: Apr 2009

Posts: 2,657

Likes: 149

From: NC

Please make an attempt at spelling, reading that post is rather difficult

Diagrams
http://i150.photobucket.com/albums/s...s/99-03LS1.jpg

http://www.lt1swap.com/pictures/8_fuel_injectors.gif

Mar 28, 2010 | 10:17 PM

#33

fptransport

On The Tree

Joined: Feb 2009

Posts: 130

Likes: 0

From: san antonio tx

I went to pep-boys and they have a small fuse box that holds 4 fuses each, I bought 2 of them for about 3.00 each, I then got the pin outs and followed the directions at the above link lt1swap ,works great, dont look too bad, good luck

Reply Subscribe