LSx balancer
Thread Starter
TECH Senior Member
Joined: Jul 2009
Posts: 8,032
Likes: 661
LSx balancer I want to pick up a used balancer and cut off the spokes to use the hub to help installing the timing cover on a 08 LY6. Won't any year 5.3/5.7/6.0/6.2 L engine work? Are these known to wear on the hub at the seal location? Looking at the hub isn't always a option
Last edited by Jimbo1367; Mar 31, 2010 at 07:00 PM. Reason: question answered
Any hub will work.
I just leave the front cover bolts loose until the hub is fully set, but you have a good idea if you are going to be doing a lot of installs, open up the inside enough to make it just slip onto the crank like set up bearings for rear gears.
I just leave the front cover bolts loose until the hub is fully set, but you have a good idea if you are going to be doing a lot of installs, open up the inside enough to make it just slip onto the crank like set up bearings for rear gears.
