fuel rail
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Dec 2009
Location: So Cal
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
fuel rail
Ok so i have truck injectors that i removed the cup off the end to fit my ls1 intake and when i went to hook up the fuel rails they are about 3/4" away? The rail was on a ls6 manifold. Are the truck injectors shorter or are the rails different?
#2
TECH Addict
iTrader: (2)
Car rails and injectors only work on car intakes. Truck rails and injectors only work on truck intakes. Yes, the truck injectors are shorter than the car injectors.
I'm sure there is a way to mod it to work but I wouldn't suggest it. Think like this... 60#'s of fuel and untested oddball connections with under hood heat = fire. Just buy car injectors you will be time and stress ahead. Keep in mind you will need new electrical plugs to the injectors because they use different connectors.
I'm sure there is a way to mod it to work but I wouldn't suggest it. Think like this... 60#'s of fuel and untested oddball connections with under hood heat = fire. Just buy car injectors you will be time and stress ahead. Keep in mind you will need new electrical plugs to the injectors because they use different connectors.
#6
TECH Addict
iTrader: (2)
I saw an incomplete chart about different flow rates for varying engines broken down by year and application but I can't find it. I believe it was on LT1swap.com but I'm not sure. If I happen across it I will post a link to it.
Last edited by gofastwclass; 04-11-2010 at 05:03 PM.