Fox Mustang swap 2 sensors water temp and oil
05-11-2010, 07:44 PM
#1
Launching!
Thread Starter
iTrader: (2)
Join Date: Oct 2005
Location: FL
Posts: 238
Likes: 0
Received 0 Likes
on
0 Posts
Fox Mustang swap 2 sensors water temp and oil I am down to 2 sensors left to get working and looking for any input.
Car is a 85 fox lx originally a 4 banger.
1. Water temp I put the stock sensor into the T-stat housing, and ran the one wire from guage to sensor, and am getting nothing. Was wondering if anyone new wireing diagram so I can check if I did this right, or another way to get water temp easily.
2. Oil pressure, I would like to use stock guage, but I do need oil pressure, what have other people done?
Thank you.
Car is a 85 fox lx originally a 4 banger.
1. Water temp I put the stock sensor into the T-stat housing, and ran the one wire from guage to sensor, and am getting nothing. Was wondering if anyone new wireing diagram so I can check if I did this right, or another way to get water temp easily.
2. Oil pressure, I would like to use stock guage, but I do need oil pressure, what have other people done?
Thank you.
