LQ4 wire to cable conversion for throttle needed
LQ4 wire to cable conversion for throttle needed I need to convert the wire to the throttle body to be a cable. Could I just put a ls1 throttle and have it work? I would like to know what is the way I can have a cable on the LQ4. Thanks.
A lot would depend on the on the year, etc.
You need to switch the throttle body for a cable,
Add the IAC, and TPS wiring to the harness,
Have the PCM flashed with a DBC OS, not all DBW PCM's can be flashed to DBC, since they don't have IAC drivers in them
You need to switch the throttle body for a cable,
Add the IAC, and TPS wiring to the harness,
Have the PCM flashed with a DBC OS, not all DBW PCM's can be flashed to DBC, since they don't have IAC drivers in them
It's out of a 2006 Sierra. Could I use a LS1 PCM?
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
You could send me your PCM and I will get you the right PCm for the job. If it is an LQ4, it is more than likely a 24x. If it is grey, you will not be able to run cable as there are no IAC motor drivers in any of the 58x controllers.
Teching In
Joined: Sep 2009
Posts: 36
Likes: 0
How much and do you happen to have the cables??
