LS1TECH - Camaro and Firebird Forum Discussion
LS1-LS2-LS3-LS6-LS7 PERFORMANCE
Conversions & Swaps
G-body ecu wirning

Conversions & Swaps LSX Engines in Non-LSX Vehicles

Sponsored by:

G-body ecu wirning

Reply Subscribe

Search this Thread

Old

Jul 1, 2010 | 09:16 PM

#1

Thread Starter

Teching In

Joined: Sep 2009

Posts: 36

Likes: 0

Default

G-body ecu wirning

Can you use the stock fuse box in a G-Body to wire up the ecu???
If yes how and any pictures???

Thanks
-Ali

Old

Jul 1, 2010 | 09:38 PM

#2

On The Tree

iTrader: (3)

Joined: Aug 2009

Posts: 159

Likes: 0

From: Tennessee

Default

You can run power to the ecu from the factory connector on the firewall near the wiper motor and brake booster. No pics though and my harness is currently being used by a buddy to start another vehicle so can't go take any at this moment either.

Old

Jul 2, 2010 | 12:05 PM

#3

Thread Starter

Teching In

Joined: Sep 2009

Posts: 36

Likes: 0

Default

Quote:

Originally Posted by Monte LS....1

You can run power to the ecu from the factory connector on the firewall near the wiper motor and brake booster. No pics though and my harness is currently being used by a buddy to start another vehicle so can't go take any at this moment either.

never thought about using that, I'll look into it

Old

Jul 2, 2010 | 03:42 PM

#4

TECH Addict

iTrader: (22)

Joined: Apr 2009

Posts: 2,656

Likes: 149

From: NC

Default

The LT1 fuseblock is enough to run a LSx engine. Repin the relay and fuses to what youll use in the end. It's just ugly

Easier route would be to build your own from new parts. They're inexpensive, check out LT1swap.com for PNs and diagrams

Reply Subscribe

body, box, ecu, fuse, gbody, removal

First
Prev
1 / 1
Next
Last

All times are GMT -5. The time now is 01:09 PM.