1985 Monte Carlo 6.0 LQ4 swap
#22
Teching In
Thread Starter
iTrader: (1)
Join Date: Aug 2010
Location: Columbus, IN
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
SHEEEESH......that is terrible!!! WHOA, good thing you are ok...That really stinks man.
qelsupreze
Not sure if the truck intake would fit under a stock hood, I test fit it on the engine without the hood on and it sat too tall for my liking, but it may fit.
Also, Adding a picture of the engine as it is right now.
qelsupreze
Not sure if the truck intake would fit under a stock hood, I test fit it on the engine without the hood on and it sat too tall for my liking, but it may fit.
Also, Adding a picture of the engine as it is right now.
![Name: July2010007resize.jpg
Views: 5065
Size: 86.1 KB](https://ls1tech.com/forums/attachments/conversions-swaps/670074d1501791986-1985-monte-carlo-6-0-lq4-swap-july2010007resize.jpg)
#24
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I have a 1985 Monte Carlo SS now the issue I’m having is which wires in my factory harness am I going to use. I️ took my Harness from the passenger side tape up tucked in passenger fender I’m assuming the Harness coming out of driver side I will be Reusing. Wanted to know which wires in this harness is for temp gauge oil pressure gauge RPM gauge voltage gauge. Any help will be greatly appreciated.