5.3 into a toyota
09-24-2010, 01:20 AM
#22
09-24-2010, 09:53 PM
#23
Just this one, only been around the block in it so far. Just got to the point of when I get free time I just *try* to relax, so this has been on the back burner. Really just needs to be inspected and tagged... but w/ MD inspections I'm not looking forward to it.
http://s27.photobucket.com/albums/c1...t=MVI_1648.mp4
http://s27.photobucket.com/albums/c1...t=MVI_1648.mp4
09-14-2012, 12:01 AM
#24
Teching In
Thread Starter
Join Date: Sep 2010
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
its been a while since i worked on my truck but am finally getting back to it, where is a good place to have my pcm reflashed to remove the vats and emmisions and o2's removed, i also need to find a spacer or flex plate for my th350 trans, any ideas?
09-15-2012, 11:47 PM
#26
the spacer to run the turbo 350 is GM p/n 12563532 and you will need the 6 longer 11mm bolts they are GM p/n 1256533 and if the engine didnt come with the flexplate you will need it also GM p/n 12621399. you can get every thing from a Chevy or GM dealer. i have used Speartech to reflash the ecu on mine as well as rework the stock harness did a great job
Last edited by Ls1.63cad; 09-15-2012 at 11:56 PM.
09-20-2012, 12:16 AM
#29
Staging Lane
Join Date: Feb 2010
Location: coldspring, tx
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
Haha proud of that picture huh? I saw youre thread and it looks sick. Im curious what others did for manifolds though. We modified my factory f-body manifolds to run inside the frame, what you do i seen what looks like shorties??
