-AN fitting for power steering line
-AN fitting for power steering line Does anyone know which of these would work for the high pressure side going in the steering box?
http://www.summitracing.com/parts/RUS-648040/
http://www.summitracing.com/parts/EAR-991956ERL/
http://www.summitracing.com/parts/AER-FBM2965/
http://www.summitracing.com/parts/RUS-648040/
http://www.summitracing.com/parts/EAR-991956ERL/
http://www.summitracing.com/parts/AER-FBM2965/
TECH Senior Member
Joined: Jul 2009
Posts: 8,032
Likes: 661
Thanks
Why would you need or want an o-ring on an inverted flare fitting? Those should be a high pressure metal-to-metal seal. Adding an o-ring without a fitting & gland designed for one wont do any good.
Trending Topics
Sorry, I did not know what an inverted flare was for. I am still a really new to this. Thanks for letting me know. I guess i am good to go. Power stearing is plumbed, and I can check that off my list.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Sorry to hijack your tread but does anyone know the fitting sizes for the jeep grand cheroke box? I know they are metric, and I believe thy are the same size as stock 98-02 f-bodies. Thanks.
Moderator
Joined: Aug 2010
Posts: 7,323
Likes: 529
From: Ann Arbor, MI
GM steering boxes through about 1980 were inverted flare fittings. Then starting in 1981 they are metric fittings WITH O-rings. IIRC, the high pressure feed is a 18mm and the return is a 16mm.
Sorry I don't know the sizes for Jeeps or other cars. When I need help, I call the number at http://www.anplumbing.com and quickly get expert help and can order the right part for immediate shipment.
Sorry I don't know the sizes for Jeeps or other cars. When I need help, I call the number at http://www.anplumbing.com and quickly get expert help and can order the right part for immediate shipment.
FWIW, the "JIC" fittings are the same as AN, and not nearly as pricey. Thats what most hydraulic lines are made from. They are built with the same premise. 37 degree pitch and all.
You can pick em up at your local parts store (provided they aren't idiots)
Gdday!
You can pick em up at your local parts store (provided they aren't idiots)
Gdday!
TECH Senior Member
Joined: Jul 2009
Posts: 8,032
Likes: 661
