Conversions & Swaps LSX Engines in Non-LSX Vehicles
Sponsored by:
Sponsored by:

SPEARTECH- quote

Thread Tools
 
Search this Thread
 
Old 12-01-2010 | 05:48 PM
  #1  
Jimbo1367's Avatar
Thread Starter
TECH Senior Member
15 Year Member
 
Joined: Jul 2009
Posts: 7,927
Likes: 608
Default SPEARTECH- quote

Has anyone had a hard time trying to get a quote from John Spears? Is he typically a week or two behind to reply to e/m's requesting quotes?

My work schedule keeps me from simply calling.
thanks,
Jim
Old 12-01-2010 | 06:48 PM
  #2  
ebk06's Avatar
Launching!

iTrader: (5)
 
Joined: Sep 2010
Posts: 264
Likes: 0
From: Austin, TX
Default

He replied to my emails within 36 hours each time i emailed him a few weeks ago. I think he's charging around $450 to rework a harness for custom swap. Dont quote me on it though.
Old 12-01-2010 | 06:55 PM
  #3  
Indyjc's Avatar
TECH Apprentice
iTrader: (1)
 
Joined: Jun 2005
Posts: 306
Likes: 0
Default

Never had a problem. I've left him phone messages and he has returned my calls.
Old 12-01-2010 | 07:38 PM
  #4  
CFster's Avatar
Staging Lane
 
Joined: Oct 2010
Posts: 82
Likes: 0
From: CT
Default

Usually replied to my emails within a day or so. No problems here.
Old 12-01-2010 | 07:40 PM
  #5  
S10xGN's Avatar
TECH Junkie

iTrader: (11)
 
Joined: Jul 2005
Posts: 3,782
Likes: 7
From: Port Neches, TX
Default

Holidays, tough time of year for instant responses...
Old 12-01-2010 | 08:56 PM
  #6  
frojoe's Avatar
TECH Fanatic
iTrader: (10)
 
Joined: May 2007
Posts: 1,792
Likes: 28
From: Vancouver BC, Canada
Default

Unless he's gone under and dropped off the face of the planet (100% not likely), then he will eventually get to your messages and give you a very courteous & helpful response!
Old 12-01-2010 | 09:56 PM
  #7  
ebk06's Avatar
Launching!

iTrader: (5)
 
Joined: Sep 2010
Posts: 264
Likes: 0
From: Austin, TX
Default

Originally Posted by frojoe
Unless he's gone under and dropped off the face of the planet (100% not likely), then he will eventually get to your messages and give you a very courteous & helpful response!
he better not have gone under. hes got my harness right now lol.
Old 12-02-2010 | 09:22 AM
  #8  
kwhizz's Avatar
TECH Fanatic
15 Year Member
 
Joined: Jul 2008
Posts: 1,566
Likes: 169
Default

Originally Posted by ebk06
he better not have gone under. hes got my harness right now lol.

I talked to John the other day about a job he did for me a year ago....still very helpful even though the question was out of the scope of what John did for me.........I don't understand why you guy's start this going out of business stuff........John is busy and one of the Best in the business...........


Ken
Old 12-02-2010 | 09:34 AM
  #9  
ghettocruiser's Avatar
TECH Fanatic
iTrader: (17)
 
Joined: Mar 2006
Posts: 1,746
Likes: 2
From: West Chester, PA
Default

Ive never purchased anything from him what so ever...but it didnt stop him from giving me over the phone help when I was building my own harness. He seems to be a real stand up guy.

I second the holiday stuff. If you can, and need something quick, give him a buzz.

J.
Old 12-02-2010 | 09:40 AM
  #10  
ebk06's Avatar
Launching!

iTrader: (5)
 
Joined: Sep 2010
Posts: 264
Likes: 0
From: Austin, TX
Default

No one said he was out of business. If you read the entire thread it was really just a guy joking that that would be the only reason he wouldnt answer an email. If he was out of business I wouldnt have sent him my harness 2 weeks ago.
Old 12-02-2010 | 01:01 PM
  #11  
turbo kid's Avatar
On The Tree
iTrader: (9)
 
Joined: Jun 2007
Posts: 101
Likes: 0
Default

John is the best there is period.Before,during and after.
Old 12-03-2010 | 12:57 PM
  #12  
-Joseph-'s Avatar
LSxGuy widda 9sec Mustang
iTrader: (12)
 
Joined: Nov 2001
Posts: 3,043
Likes: 0
From: Texas and Qatar
Default

Originally Posted by turbo kid
John is the best there is period.Before,during and after.


John has always been very helpful through emails and phone calls. He even helped with some pictures for my LS Retrofit and Swap manual.
Old 12-03-2010 | 01:07 PM
  #13  
Jeremy@RPMTransmissions's Avatar
FormerVendor
iTrader: (12)
 
Joined: Sep 2010
Posts: 1,553
Likes: 1
From: Anderson Indiana
Default

John is great at what he does. He is swamped right now. He is right down the road from us. Give him some time or give the shop a call. They opperated with only a few guys to keep the system streamlined so they are always up to their eyeballs.
Old 12-04-2010 | 02:53 PM
  #14  
Jimbo1367's Avatar
Thread Starter
TECH Senior Member
15 Year Member
 
Joined: Jul 2009
Posts: 7,927
Likes: 608
Default

Originally Posted by Jeremy@RPMTransmissions
John is great at what he does. He is swamped right now. He is right down the road from us. Give him some time or give the shop a call. They operated with only a few guys to keep the system streamlined so they are always up to their eyeballs.
I called John (Speartech)Wednesday or Thursday. His shop is closed for the holiday until Dec. 6 (Monday)

I hear Johns the best and excellent customer support. That's why he's getting my business.
Old 12-04-2010 | 04:39 PM
  #15  
stcloudguy's Avatar
Teching In

 
Joined: Aug 2004
Posts: 37
Likes: 1
Default

I've done 2 conversions now, LS-1 in a '89 Camaro and a LQ-4 in a '71 Nova, John did them both. Installation and start up were painless. He does great work, has my vote!
Old 12-04-2010 | 05:38 PM
  #16  
ebk06's Avatar
Launching!

iTrader: (5)
 
Joined: Sep 2010
Posts: 264
Likes: 0
From: Austin, TX
Default

Originally Posted by Jeremy@RPMTransmissions
John is great at what he does. He is swamped right now. He is right down the road from us. Give him some time or give the shop a call. They opperated with only a few guys to keep the system streamlined so they are always up to their eyeballs.
Thanks for that bit of info. I was actually thinking of calling him to see how things were going. I figured he was busy so now Ill hold off for a few more weeks. I hate feeling like im being a nag to these guys lol.
Old 12-04-2010 | 09:54 PM
  #17  
gMAG's Avatar
TECH Junkie
iTrader: (1)
 
Joined: Mar 2003
Posts: 3,028
Likes: 4
From: CT
Default

Originally Posted by -Joseph-


John has always been very helpful through emails and phone calls. He even helped with some pictures for my LS Retrofit and Swap manual.
Ditto for me...They don't get better than John @ SPEARTECH!
And the same goes for you, Joseph! (LS1 TDC/Timing issue)



Quick Reply: SPEARTECH- quote



All times are GMT -5. The time now is 10:23 PM.