96IMPPUSHA

iTrader: (1)

Bump for updates!

dirty94SS

iTrader: (5)

To the top

loweredd

iTrader: (2)

Bump! Cool to see a B-body, and even better to see you're in Sioux City. Whoa!!

SS409

Sorry that I have not updated my build in a year!, but I had been switching jobs and had no funds for the project.

I am going to start back up on it this week, and finally get this car done!

SS409

Thanks loweredd, glad to see another b-body ls swap so close! If you ever get to Sioux City, hit me up I would like to see your car and chat and maybe have a beer

krwyellowZ28

iTrader: (10)

Get this thing together and on the road so I can copy your build... I mean, so you can finally enjoy it.

SS409

Ok, I had some time to work on the motor this week, I am firing it up on the engine stand before I put it in, to make sure everything works good.

I could not get it to fire!
I checked all power and grounds, all good.
I tested spark, and it was good.

So I shot some starter fluid in it, and it fired right up for a few seconds!

i had injector pulse but no spray, so i pulled off the injectors and tested them, 7 out of 8 where stuck. I manged to get 3 of them freed up, so I have to go get 4 new injectors.

I will post a video when i get new injectors & it up and running!

aknovaman

iTrader: (7)

Would have been cheaper to send them to Mr Injector for cleaning/rebuild than buying replacement ones. ;-)

SS409

Thanks, I will check into that, but I might upgrade all injectors to bigger ones while I'm at it.

Does anyone know a bigger injector that will fit both ly6 & ls3 intakes? I don't mind having to use spacers, if needed for ly6 intake.

NemeSS

iTrader: (127)

stock ly6 are 40lb @ 58psi.
got a truck making 450rw w em right now. stock ly/l92 intake and ly6 injectors.
more than enuff fir ur build. no need to upgrade. but bent on doing so. some camaro ls3 flow bout same or lil more. but are normal size. not short like ly6.
imo just have urs cleaned and serviced. should b cheaper. or at least u know they will be trouble free if serviced

SS409

[QUOTE=NemeSS;17694204]stock ly6 are 40lb @ 58psi.
got a truck making 450rw w em right now. stock ly/l92 intake and ly6 injectors.
more than enuff fir ur build. no need to upgrade. but bent on doing so. some camaro ls3 flow bout same or lil more. but are normal size. not short like ly6.
imo just have urs cleaned and serviced. should b cheaper. or at least u know they will be trouble free if serviced[/QUOTE

What duty cycle are you at?. I'm getting conflicitng stories on flow rate of these injectors.

Mine are part #12580681
it says here they run at 30lb at 58psi?
https://ls1tech.com/forums/fueling-i...flow-rate.html
I can buy new ones here for $30
http://www.ebay.com/itm/NEW-FUEL-INJECTOR-217-1621-12580681-FOR-CADILLAC-CHEVROLET-GMC-/300963463168?pt=Motors_Car_Truck_Parts_Accessories&hash=item4612d20000&vxp=mtror I can buy at set of LS3 injectors for $169 here
http://www.ebay.com/itm/NEW-GM-Chevy-Set-of-8-Fuel-Injectors-V8-6-2L-Gen-IV-GM-12576341-BOSCH-/161005856876?pt=Motors_Car_Truck_Parts_Accessories&hash=item257cb2686c&vxp=mtr
How much to get my injectors cleaned? and can they fix one if it don't ohm out?

Thanks

SS409

I got it up and running good!

As promised here is a video:
http://www.youtube.com/watch?v=qf4E0...ature=youtu.be

loweredd

iTrader: (2)

Nice! I might have to have you give me a crash course in HPTuners to get mine startable.

SS409

Thanks, I'm still learning HP Tuners my self, but I could help you get it running and driveable. What engine mods do you have?

loweredd

iTrader: (2)

None. Just need to delete VATS and emissions.

SS409

Thats easy, hit me up when your ready, and i will help you out.

loweredd

iTrader: (2)

It's been almost 3 months.......any progress?