New mechanical speedometer drive solution
Staging Lane
Joined: Dec 2007
Posts: 85
Likes: 0
I need one! What are your estimates for turnin' the final product, assuming Quality Testing and final design are successful? How long will each one take to assemble?
Good thing we won't have to send in our cluster, that will save time. I have no problem doing some slight modification to fit the unit onto my cluster.
Good thing we won't have to send in our cluster, that will save time. I have no problem doing some slight modification to fit the unit onto my cluster.
Registered User
Joined: Feb 2012
Posts: 3
Likes: 0
No officer I was not doing 90mph, I was doing at least 120mph...please don't insult my car like that!
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Guys just got off the Phone with 
Zipster and the test run in his car of the prototype went Great it all worked out and was as smooth as butter he said all the way down to 2mph.
He all so said that he will be shipping my Prototype soon
so i will have it on the Hot Rod Power Tour to test and show off to you guys.And to help get the Word out about the New Speedometer Drive Solution that is about to hit the market.
As soon as i have one in my car i will get some video so you guys can see it working for you self. I will all so take Video of it on the Power Tour going down the Interstate so you can see how its gone to work in the real world on the highway.
Zipster and the test run in his car of the prototype went Great it all worked out and was as smooth as butter he said all the way down to 2mph. He all so said that he will be shipping my Prototype soon
so i will have it on the Hot Rod Power Tour to test and show off to you guys.And to help get the Word out about the New Speedometer Drive Solution that is about to hit the market. As soon as i have one in my car i will get some video so you guys can see it working for you self. I will all so take Video of it on the Power Tour going down the Interstate so you can see how its gone to work in the real world on the highway.
9 Second Club
Joined: Nov 2003
Posts: 13,616
Likes: 185
From: Norn Iron
Great job. That was always one annoyance of my Abbot. From 0-10 mph it rarely worked, only popped up around 10mph. Although on the way down it would work ok. Just from standstill was the issue.
The Great Thing about the one Zipster has came up with is it will work in any Car with little to No Modifying of the dash. He has been working trying to make it as Universal as he can. Its just gone to hook on the back of your Stock Dash in the place of your old Speedo Cable and it will turn your Speedo just like your Old Cable did.
The Speedo Drive Solution will take up about as much room as a D Size Battery so if you have anuff room on the back of your dash that a D size battery will fit then the Speedo Drive Solution should work in your car.
The Speedo Drive Solution will take up about as much room as a D Size Battery so if you have anuff room on the back of your dash that a D size battery will fit then the Speedo Drive Solution should work in your car.
Teching In
Joined: Oct 2009
Posts: 9
Likes: 0
From: Savannah GA
Mechanical Speedometer solution like I said before... COUNT ME IN FOR ONE!!! I can't wait to put my stock 71 c10 dash back in the truck (71 restomod w/ LS1 and 4L60E).
Thanks and PLEASE let me know when these are ready for purchase.
Thanks again for all the hard work guys!!!
Thanks and PLEASE let me know when these are ready for purchase.
Thanks again for all the hard work guys!!!
