Got the polished water pump and alt on and the Procharger brackets
Be Cool polished radiator and spal fans.
carbon fiber glove box door with the quick latch mini installed, and the
ground effects are installed here is the first side profile shot for you.
more soon.

 

ran brake lines today, started running wire harness for the Holley and the gauges.
prepped the carbon fiber wing and test fit. had few issues with the front drive shaft
clearing the oil sending unit. very tight fit but I finally got it. thxnx for positive feed back I did not know how everyone would except it had a lot of hater and people telling me we could never make it work I have heard that 1,000 times. So that being said I am so happy to finally start seeing the light at the end of the tunnel. more soon.

 

The unsolicited negative feedback I receive is typically from people without the resources to accomplish what I'm doing. People with skills usually say why something won't work, explain what you are doing wrong and may even offer to lend a hand.

 

Loving the color and like the AWD hardware under the front. Keep up the good work.

 

looks good! perfect union between the two different generations

 

laying down the stripes and hope to clear coat tomorrow I hope to get the tricoat pearl on yet tonight. more soon.

 

You guys work fast.

 

the paint work is finished up got it cleared today. buffing and final assembly are up next. 2 weeks to finish it up for sema.
Got a lot of stuff to finish up but starting to look like a car at least.

 

looks good.

 

major props , cant wait untill it gets done, killer build

 

Forgeline wheels came in and got mounted to my Toy tires today
mounted the master and ran brake lines.
installed the machined washer to the shock towers
Mounted the speedster humps
Finished buffing out the paint job.
You can see he tricoat flip flop pearl on the black stripe.

 

Wow, the 2010 front flares really tied the new and old together. Can't wait to see the final product.

 

You missed one...
I find the people with the most negative feedback for me or lack of credit where credit is due are the ones who are just jealous that you thought of it first or have the skills to do it and they don't.
Personally, I have found that the best fabricators/craftsman know good work when they see it and are self confident enough in their own skills to compliment another person's skills.

 

Just found this and the drawing had me thinking this was not going to turn out to my liking but the result thus far is much nicer than expected. The lines flow well together. GL at Sema

 

The windshield it installed and the carbonfiber cover panel on it.
mirrors are test fit.
rear facia and defussor panel installed as are the tail lights.
rear lights are wired up, trunk lid and wing installed..
Finally got the rest of my parts for the 4 link rear end so hope to have that in today.
making up p/s line today and working on wiring.

 

Just caught up on yalls thread, kickass project!! Hope u guys make the show you're shootin for

 

We got the 4 link and the rearend in the car today. a 14 bolt 9.5 ring with a 4.10 gear. Shock wave air bag system. mounted the ForgeLine weels on the car for the first time. 7" outside lip NICE.
running the wire for the Dominator Holley EFI system.
Here is a shot of the Holley Dual pump fuel pump twin pumps will handle 1400 hp. more soon.

 

Been wiring all day only a few more thing left . got the doors opening on remote.
got the interior all wired up. working on the tail and turn signals almost ready to install int.
more soon.

 

SICK SICK SICK SICK. I am in love with this project. MAJOR props!!!!!!!!!!!!!! WOW

 

Jesus!! I love this build, it is going to be badass finished up!!!!!!!!