CT525 Circle Track Controller
04-07-2011, 01:22 PM
#1
Teching In
Thread Starter
Join Date: Mar 2011
Location: Idaho
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
CT525 Circle Track Controller We are putting together a CT525 engine very similar to the one that has been featured in the last few Circle Track magazine issues. Two combinations will be dyno tested. We’ll start out with a 750 cfm Quick Fuel carburetor, then we’ll install an LS3 intake and electronic fuel injection. Both combinations will run E85. The data collected from the dyno will be used to help establish a rules package for our local track.
I am having trouble finding a controller for the fuel injection system I like. They’re either too expensive, have features I don’t need or have features I can’t use, such as traction control.
Does anyone have any recommendations for a controller? The least expensive one I have found so far is the Stinger 4. This would have to be set up for batch fire, but that isn’t a problem for a race-only application. Are there any others I should be looking at for this application?
I am having trouble finding a controller for the fuel injection system I like. They’re either too expensive, have features I don’t need or have features I can’t use, such as traction control.
Does anyone have any recommendations for a controller? The least expensive one I have found so far is the Stinger 4. This would have to be set up for batch fire, but that isn’t a problem for a race-only application. Are there any others I should be looking at for this application?
