73 Camaro with Dynatech headers
Thread Starter
TECH Fanatic
Joined: Sep 2008
Posts: 1,641
Likes: 526
73 Camaro with Dynatech headers See attached pics of the Dyna tech headers on my 73 Camaro.
They fit nice but hang below the subframe rail by 1.5"
They clear the body by at least the same amount.
I'm running a L92/600 TKO swap.
No tires and wheels yet to confirm clearance. On order 18" Vintage Wheels.
Made the adapter mounts and redrilled the the subframe 1" back. Should be the same as the Car Shop 1" set back plates.
They fit nice but hang below the subframe rail by 1.5"
They clear the body by at least the same amount.
I'm running a L92/600 TKO swap.
No tires and wheels yet to confirm clearance. On order 18" Vintage Wheels.
Made the adapter mounts and redrilled the the subframe 1" back. Should be the same as the Car Shop 1" set back plates.
TECH Senior Member
Joined: Jul 2009
Posts: 8,032
Likes: 661
surprizingly.. they are lower than the Edelbrocks. I looked at GArys thread to compare, and was surprized. I tried ordering the Eddys yesterday, but they are out of stock/discontinued. I will order the Dynatechs this week. Did you get the 2 1/2" or 3" collecters?
TECH Senior Member
Joined: Jul 2009
Posts: 8,032
Likes: 661
Trending Topics
Thread Starter
TECH Fanatic
Joined: Sep 2008
Posts: 1,641
Likes: 526
Motors back in tonight. 1 7/8" tube so they are more than 1 1/2 " below the subframe. Headers go back in tomorrow as a final fit. Yes they are very pretty. Pushed the trans right up into the tunnel. 1/4" clearance to the top of the TKO600. More pics to follow this weekend.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo TECH Senior Member
Joined: Jul 2009
Posts: 8,032
Likes: 661
Thanks for the money shot. Very pretty headers. Too bad they are that low. If they were as close (tucked up) as the Eddys'... I'd buy em.
Thanks for clearing it up. I was hoping the excessive hangdown was just the angle when you took the pic. Looks like I might just buy Summit or Jegs 1 3/4 BBC headers and LSx flanges until something better comes along.
Thanks guys.
Motors back in tonight. 1 7/8" tube so they are more than 1 1/2 " below the subframe. Headers go back in tomorrow as a final fit. Yes they are very pretty. Pushed the trans right up into the tunnel. 1/4" clearance to the top of the TKO600. More pics to follow this weekend.
Thanks guys.
