meangbody

iTrader: (1)

I am swapping a 97 F-body LT1 into my 79 Cutlass. I have the XH 3rd gen F-body power steering gearbox. I plan to run an external reservoir and the factory LT1 f-body pump. I would like to make my own braided stainless AN lines. I am not sure what kind of adapter fittings I am going to need to adapt the XH box to the 4th gen pump. Any advice?

garys 68

iTrader: (1)

You need power steering spec hose.
Try Speedway Motors, search "power steering hose". They have everything you'll need.

Project GatTagO

iTrader: (7)

Earl's makes the right o-ring style adapter fittings that will go in the steering box and have AN-6 on the other side.

Andrew

meangbody

iTrader: (1)

Do you have a part # for the correct fitting? I was planning on running -8 supply and maybe -6 or -8 return.