Conversions & Swaps LSX Engines in Non-LSX Vehicles
Sponsored by:
Sponsored by:

ID this connector

Thread Tools
 
Search this Thread
 
Old 05-16-2011 | 08:06 PM
  #1  
steve000's Avatar
Thread Starter
Staging Lane
iTrader: (54)
 
Joined: May 2008
Posts: 82
Likes: 0
From: 37075 - TN
Default ID this connector

It attaches in the middle of the two fan connectors. This was a 1999 bird 3800 swapped to a ls based motor. What is it and where does it goes, sorry about the bad pic quality, camera phones
Attached Thumbnails ID this connector-2011-05-16-20.43.03.jpg  
Old 05-16-2011 | 08:16 PM
  #2  
deuce4935's Avatar
TECH Resident
iTrader: (2)
 
Joined: Sep 2006
Posts: 759
Likes: 3
Default

Looks like it can be abs module connector or cruise control module. Or could plug into the front mounted sensor that sets off the airbags in case of accident.
Old 05-16-2011 | 08:26 PM
  #3  
steve000's Avatar
Thread Starter
Staging Lane
iTrader: (54)
 
Joined: May 2008
Posts: 82
Likes: 0
From: 37075 - TN
Default

Not abs and I dont think cruise
Old 05-16-2011 | 08:36 PM
  #4  
2xLS3's Avatar
Banned
iTrader: (3)
 
Joined: Apr 2011
Posts: 107
Likes: 0
Default

what color are the wires going to it
Old 05-16-2011 | 08:43 PM
  #5  
steve000's Avatar
Thread Starter
Staging Lane
iTrader: (54)
 
Joined: May 2008
Posts: 82
Likes: 0
From: 37075 - TN
Default

A- Black
B- Purple
C- Gray
D - Brown
E - Yellow
F - Gray w/ black stripe
G - Green
H - Black
Old 05-16-2011 | 09:08 PM
  #6  
2xLS3's Avatar
Banned
iTrader: (3)
 
Joined: Apr 2011
Posts: 107
Likes: 0
Default

Its not criuise, that's a 10 wire plug
It also isn't anything to do with ABS or traction control, since none of it uses an 8 wire plug
It has nothing to do with the wipers either
I searched the manual and couldn't come up with anything, Sorry
Old 05-16-2011 | 09:21 PM
  #7  
lt4malibu's Avatar
TECH Fanatic
20 Year Member
iTrader: (39)
 
Joined: Aug 2003
Posts: 1,037
Likes: 2
Default

thats the throttle actuator control connector...
Old 05-16-2011 | 09:23 PM
  #8  
ls1nova71's Avatar
TECH Veteran
15 Year Member
iTrader: (4)
 
Joined: Jan 2008
Posts: 4,382
Likes: 200
From: Liberty, MO
Default

Was the v-sucks a DBW? Pretty sure they were, it looks like the DBW plug for the throttle body.
Old 05-16-2011 | 09:26 PM
  #9  
steve000's Avatar
Thread Starter
Staging Lane
iTrader: (54)
 
Joined: May 2008
Posts: 82
Likes: 0
From: 37075 - TN
Default

I think it relates to the fans somehow and or it connected into the v6 engine harness near the TB, thanks for looking 2xLS3
Old 05-16-2011 | 09:27 PM
  #10  
steve000's Avatar
Thread Starter
Staging Lane
iTrader: (54)
 
Joined: May 2008
Posts: 82
Likes: 0
From: 37075 - TN
Default

yea, I'm thinking it was for the DBW throttle body
Old 05-16-2011 | 10:05 PM
  #11  
2xLS3's Avatar
Banned
iTrader: (3)
 
Joined: Apr 2011
Posts: 107
Likes: 0
Default

For some reason it isn't shown in the 99 manual, but it does in the 2000 one
Pin
Wire Color
Circuit No.
Function

A

BLK
476
TP Sensor 2 Ground

B
PPL
486
TP Sensor 2 Signal

C
GRY
597
TP Sensor 2 5V Reference

D
BRN
582
Not Used

E
YEL
581
Motor Driver-High

F
GRY/BLK
1687
TP Sensor 1 5V Reference

G
DK GRN
485
TP Sensor 1 Ground

H
BLK
470
TP Sensor 1 Ground



Quick Reply: ID this connector



All times are GMT -5. The time now is 07:56 PM.