A few questions with sensor connectors
#1
On The Tree
Thread Starter
iTrader: (5)
Join Date: Nov 2010
Posts: 189
Likes: 0
Received 0 Likes
on
0 Posts
A few questions with sensor connectors
I'm putting an LS1 from a 2000 Z28 into a 95 Z28.
The vss sensor on the 95 trans is different than the one on the wiring harness. What type of connector do I need?
The temp sensor and the connector do not match up. Do I need a different temp sensor?
Also does anyone have a picture or routing guide to the pcv system?
The vss sensor on the 95 trans is different than the one on the wiring harness. What type of connector do I need?
The temp sensor and the connector do not match up. Do I need a different temp sensor?
Also does anyone have a picture or routing guide to the pcv system?