No it won't hurt them,I soaked mine overnite. Mine were junk, I tried smackin em ,soakin em, and pulsing them and nothing worked. I picked some up from a local yard for $25 each.

 

I tried that and nothing happened so pulled them completely out and have them soakin. Where do I yet a noid light and how much in case that fails?

 

the local ap store. Most sell noids..

 

Second that. Will be in the tool section.

 

Any word?

 

The injectors are spraying. It acted like it was gonna start but the starter shifted so I have to tighten the bolts back up. They keep slipping out for some reason.

 

Throw some loctite on those bitches.

 

The bolt broke off in the motor from the force of the starter lol, just tightened the other bitch down real good.

http://www.youtube.com/watch?v=6Up9twPl6Cg

 

Great Job glad to hear you get it running, when mine first started I about creamed in my pants. You might want to get that broken bolt in the starter removed as soon as possible and install both bolts or that starter will kick out and take a piece of the engine block with it. Good Luck

 

Sure thing! And thanks for all the help guys, couldn't have done it without yall!!

 

Sweet! Glad to see it was just the sticky injectors keeping you down. Sounds a lot like my first start, lol.

 

Why does it idle so high?

 

Could be anything, you have a lot of things unplugged still, don't you? Cold engine, no MAF, no TAC, ect... I probably wouldn't worry about it at this stage.

 

I have a set of truck injectors if your interested. I paid $120 for them and will take the same. They are in like new condition, only installed in a crate motor just to be taken back out 0 miles. I didn't realize they were truck injectors when I bought them so I can't use em. PM me if interested

-Seventi6

 

Awesome man.