samckitt

iTrader: (5)

When I got mine & it didn't fit I went to Russell's website & they had the single part number listed for both 3/8 & 5/15. Today it is not that way. My thought was, there is no way in hell the 3/8" O rings would seal against a 5/16" hard line. So not sure what was going on there.

chevelleluvr

iTrader: (1)

Hey guys can yall tell me which fittings im gonna need coming from my corvette fuel pressure regulator to my fuel rails??

samckitt

iTrader: (5)

You will need something with a GM quick connect bubble on one end & AN on the other. Speedway motors sells a kit with the filter & all fittings. I imagine they sell the one you need separate, I couldn't find it though in my quick look.

http://www.speedwaymotors.com/LS1-Fu...Kit,41791.html

NemeSS

iTrader: (127)

It is an excellent product. I will be using them from now on

LSxChevelle

iTrader: (4)

Maybe a little off topic but I need to get my fuel delivery figured out. Now if I buy this kit with an inline pump I'm good right? I suspect the 2 male ends on filter/regulator are for fuel in from pump and out to rail?

Thanks

samckitt

iTrader: (5)

The single end goes to the fuel rail. The end with dual fittings are in from pump and return to the tank. 2 of the blue fittings are 3/8 (one for in to filter and one on fuel rail) the other is 5/16 for return to tank, silver fitting is out to fuel rail.

LSxChevelle

iTrader: (4)

Ok, so I should just sump my tank run the return to the 2nd fitting on the sump?

These fittis sure do look great!

samckitt

iTrader: (5)

Yep, I would say that will work. Somewhere I had a diagram on using that filter/regulator. I'll look for it.

toyin

SWEET Im glade this came up because the parts i were looking to piece together was going to cost alot more. Thanks fella's

rfrankb4

you should get the new style of those fittings that are more secure.

LSxChevelle

iTrader: (4)

Yea, I want the new fittings for sure!

chevcruiser

Would these fittings work on the msd 2225 fuel pump also?