Motor plates to set motor back
#1
On The Tree
Thread Starter
iTrader: (14)
Join Date: Jan 2005
Location: St. Louis, MO
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Looking for a set of motor plates that will place my LS1 the closest to the firewall in my 70 Camaro. I will have a t56 and no ac. I want the most room bc the car will be either a large single or twin turbo. Exhaust will not be a factor either.
#6
TECH Enthusiast
iTrader: (31)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Look up "dirty Dingo" on ebay, i bought there 2" back 1" forward slider mounts, good price, great craftmanship!
http://cgi.ebay.com/ebaymotors/Dingo...Q5fAccessories
http://cgi.ebay.com/ebaymotors/Dingo...Q5fAccessories
Trending Topics
#9
TECH Enthusiast
iTrader: (4)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Look up "dirty Dingo" on ebay, i bought there 2" back 1" forward slider mounts, good price, great craftmanship!
http://cgi.ebay.com/ebaymotors/Dingo...Q5fAccessories
http://cgi.ebay.com/ebaymotors/Dingo...Q5fAccessories
#10
TECH Enthusiast
iTrader: (31)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
No problem!^^ my plan is to set mine back as far as possible, to give me more room for the turbo plumbing.
and its only a 2 inch difference, worst case scenario, ill be using my TH350 transmission, and if its moved back an exact 2"'s, then ill just get a crossmember for my car with a 700r4, because they are 2"'s longer than a TH350, so that will make up the difference.
and its only a 2 inch difference, worst case scenario, ill be using my TH350 transmission, and if its moved back an exact 2"'s, then ill just get a crossmember for my car with a 700r4, because they are 2"'s longer than a TH350, so that will make up the difference.