72 Camaro LS6/T56 Swap Help
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I've been a big fan of muscle cars for years...finally can't deal with carbs anymore. Looking for some help getting started with my swap of a ctsv ls6/t56 into my 72 camaro. if anyone has done this and cares to help with pics advice and other info i'd appreciate it.
#3
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
When you did your swap did you use the factory harness or did you purchase a painless harness to make life easy. I've been told I should purchase a new gas tank with a fuel pump mounted in the tank, but if I can avaiod an $800 gas tank that would be nice too. Did you have to do any accessory relocation? Any pictures? What are some of the things I should look out for?
#5
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Post some pics of the 79. I called down to Street & Performance and they were helpful. After speaking to them they made it seem extremely easy. In fact those were his words when I told him the swap details. They did an 80 firebaird and posted pics and discussion.
http://www.hotrodlane.cc/PDFFILES/80%20firebird.pdf
apparently they do a boat load of swaps and installs. I plan on doing a throttle by cable over wire install. I hate electronics and those hideous pedals
http://www.hotrodlane.cc/PDFFILES/80%20firebird.pdf
apparently they do a boat load of swaps and installs. I plan on doing a throttle by cable over wire install. I hate electronics and those hideous pedals
#6
On The Tree
iTrader: (9)
Join Date: Aug 2009
Location: Edinburg,Tx
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
When i bought my engine i was able to get the complete harness with it. I found wiring diagrams/Pinouts online and converted the harness myself to save $$. For the gas tank i left my stock tank and just put an inline fuel pump with the corvette filter/regulator, works fine! And for acc i used the stock ones. Engine was out of a 98 T/A. Look out for crap motor mount adapter plates!!! I got the carshop 1" setback plates and used clamshell mounts and motor just sit right in.