Fuel Injector connection ????
Thread Starter
Teching In
Joined: Jul 2011
Posts: 2
Likes: 0
Fuel Injector connection ???? I'm in the process of putting a 2005 5.3 out of a Silverado into my 1979 Landcruiser FJ40. Everything is going well except I ended up with a Flex Fuel Harness. My motor is not Flex Fuel so the connectors will not fit the motor's injectors.
My question.....Should I swap injectors and if I do will that create programing issues? I'm pretty sure I can get the injectors for free. Or should I buy new connectors for the injectors I have now? I'm not looking for tons of power, I'm much more interested in seamless operation.
Thoughts?
Any insight that could be provided will be very much appreciated!!!!
Thanks,
Wayne
My question.....Should I swap injectors and if I do will that create programing issues? I'm pretty sure I can get the injectors for free. Or should I buy new connectors for the injectors I have now? I'm not looking for tons of power, I'm much more interested in seamless operation.
Thoughts?
Any insight that could be provided will be very much appreciated!!!!
Thanks,
Wayne
Swap out the connectors and have the PCM tune changed to suit your swap
If you plan on big upgrades in the future then swap the injectors over because flex fuel uses slightly larger injectors
If you plan on big upgrades in the future then swap the injectors over because flex fuel uses slightly larger injectors
Tune has to match the injector size or you will be rich/lean depending on how much bigger/smaller they are compared to the tune
You have to tune out VATS for a swap anyways, so resizing the injectors is a minor thing
You have to tune out VATS for a swap anyways, so resizing the injectors is a minor thing
