Turbo ly6, 70' Chevelle....Pics...
#82
TECH Fanatic
Thread Starter
iTrader: (37)
Join Date: May 2008
Location: ocala,fl--- forest-ocklawaha
Posts: 1,034
Likes: 0
Received 0 Likes
on
0 Posts
update.. car is still on 6lbs.. never any full throttle pulls..untuned.. turbo was smoking for a while .. hooked up a pcv to crank case..cleared the smoke right up.. i have gotten two tickets past 1 month .i got clocked doin 101mph by a state trooper last month.. i wasnt even in it for long.. he let me go with a 74mph in a 45mph zone., $287.. few days ago was doin 86mph in a 55mph zone..he wasnt so generous..gave me full ticket..mandatory court appreance.. think he didnt like knoing i been drinking and i passed all four of his dui test.. .. so but i did learn my lesson.. for drinking.. not speedinggg..all theses tickets have held me up from getting it final tune..
#84
TECH Resident
iTrader: (13)
Join Date: Mar 2008
Location: On the coast of somewhere
Posts: 779
Likes: 0
Received 1 Like
on
1 Post
Funny thing is, a lot of other people spend all this money on looks and brand name parts and paying for fab work. In the end who's having fun? He is. Look at the attitude when two rods crapped out, he probably dropped an F bomb here and there but, went out and found another motor. Back at it again and most likely still sleeps well at night. I, and I'm sure many others, envy this philosophy. Love it. Oh, and that sucks about the girl. Fun while it lasted, huh?
#87
TECH Fanatic
Thread Starter
iTrader: (37)
Join Date: May 2008
Location: ocala,fl--- forest-ocklawaha
Posts: 1,034
Likes: 0
Received 0 Likes
on
0 Posts
yes it is newby's corner.. haha ..its not tuned yet.. it has old tune i had with my last 5.3 should be close ..but i wil be getting it tuned.. soon
#93
TECH Fanatic
Thread Starter
iTrader: (37)
Join Date: May 2008
Location: ocala,fl--- forest-ocklawaha
Posts: 1,034
Likes: 0
Received 0 Likes
on
0 Posts
i put in a ls3 cam.. when i assembled it it was my error putting it back togeather.. more than likly.. there was a scorged in the cylinder wall ..but it ran fine with it.. before..
this 5.3 motor idk if im going to install a aftermarket cam if i can find one for cheap.. if not stock cam will have to do.. i might go ahead install a second walbro 255.. and buy a 3 bar map sensor. i need a cam tho..
this 5.3 motor idk if im going to install a aftermarket cam if i can find one for cheap.. if not stock cam will have to do.. i might go ahead install a second walbro 255.. and buy a 3 bar map sensor. i need a cam tho..
#96
11 Second Club
iTrader: (8)
Join Date: Jan 2010
Location: Southern Idaho
Posts: 502
Likes: 0
Received 0 Likes
on
0 Posts
I can attest to the ls6 cams performance na and look forward to seeing what it does turboed, that cam you picked up should give it a healthy exhaust note and some serious performance ... In for video!
#98
TECH Fanatic
Thread Starter
iTrader: (37)
Join Date: May 2008
Location: ocala,fl--- forest-ocklawaha
Posts: 1,034
Likes: 0
Received 0 Likes
on
0 Posts
http://www.youtube.com/watch?v=GvUShWqD1k0
sounds pretty good.. its pig rich .. barly pulls a vacum.. and doesnt ideal but a tune will fix all that.. just have to wire iat , and obd II port .. and running vacum hoses for boost controler .. and off to get her tuned.. looking forward to some results..
sounds pretty good.. its pig rich .. barly pulls a vacum.. and doesnt ideal but a tune will fix all that.. just have to wire iat , and obd II port .. and running vacum hoses for boost controler .. and off to get her tuned.. looking forward to some results..
#100
TECH Fanatic
Thread Starter
iTrader: (37)
Join Date: May 2008
Location: ocala,fl--- forest-ocklawaha
Posts: 1,034
Likes: 0
Received 0 Likes
on
0 Posts
yeah i have about $3500 into the whole setup.. trans, motor ,fuel system, turbo stuff ,
$600 motor
$400 Trans
$275 valve body kit
$800 turbo
$450 misc ,piping, drain , etc.
$275 injectors
$100 pump
$300ish meth kit
$400ish cam n springs
adds up to about $3600 ish plus a tune..
waiting on tuner to have a opening ..then off for tune.. prob next week..
$600 motor
$400 Trans
$275 valve body kit
$800 turbo
$450 misc ,piping, drain , etc.
$275 injectors
$100 pump
$300ish meth kit
$400ish cam n springs
adds up to about $3600 ish plus a tune..
waiting on tuner to have a opening ..then off for tune.. prob next week..