HotRod68Camaro

iTrader: (29)

Would a clutch/brake/gas pedal assembly from a 4th gen f-body fit the firewall on my 68 Camaro and hook up properly to the brakes and clutch?

67ls1CamaroProject

I had the whole assy. but it would take too much work. I hacked the gas pedal from the 2000 for its easy hookup to the cable. The clutch bracket is easy to make, locating the clutch rod on the 68 pedal will be the most work. Take it completely out of your car and fab it up on a piece of sheet metal to mimic the firewall and do it in the bench vice. This is the easiest way to get it to work. Make sure you weld on a bracket for the clutch cancel switch and use it as a end of travel stop to save from bottoming out the clutch rod in its cylinder.