What driveshaft for 4l60e in sn95
01-21-2012, 10:21 AM
#1
Teching In
Thread Starter
Join Date: Jan 2012
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
What driveshaft for 4l60e in sn95 What do you guys do when swaping a 4l60e into an sn95?
Is there a direct fit driveshaft that doesn't cost an arm and a leg?
Or can I just swap the end of the DS to mate with a 4l60e instead of a aode?
Thanks.
DJ
Is there a direct fit driveshaft that doesn't cost an arm and a leg?
Or can I just swap the end of the DS to mate with a 4l60e instead of a aode?
Thanks.
DJ
01-21-2012, 10:04 PM
#2
Teching In
Thread Starter
Join Date: Jan 2012
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Found it. Thought I would let you guys know.
Use http://www.summitracing.com/parts/PCN-355/ with a Short yoke from a th350, 4l60e, etc etc etc.
Use http://www.summitracing.com/parts/PCN-355/ with a Short yoke from a th350, 4l60e, etc etc etc.
