Maf problem
#1
Teching In
Thread Starter
iTrader: (2)
Join Date: Sep 2007
Location: Hellertown, PA
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Hey guys,
I have an LQ4/T56 combo in my 69 Camaro, Its throwing a p0102 which is low voltage from the maf. I put my multimeter on the plug and its getting 7 volts rather then 12. Does anyone know what could be causing this? Any help is greatly appreciated.
Thanks
Tom
I have an LQ4/T56 combo in my 69 Camaro, Its throwing a p0102 which is low voltage from the maf. I put my multimeter on the plug and its getting 7 volts rather then 12. Does anyone know what could be causing this? Any help is greatly appreciated.
Thanks
Tom
#2
On The Tree
Join Date: Mar 2008
Location: Acworth, GA
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Were you backprobing the connector with it plugged in? Or testing with it unplugged?
I don't have a wiring diagram handy right now, but possibly the reference voltage that feeds your MAF also feed other sensors and one of those could be bad.
If your MAF reference voltage comes is by itself, you need to check at the source.
Also, try piercing the wire 3-4 inches away from the connector and testing again. Could be bad connector.
I don't have a wiring diagram handy right now, but possibly the reference voltage that feeds your MAF also feed other sensors and one of those could be bad.
If your MAF reference voltage comes is by itself, you need to check at the source.
Also, try piercing the wire 3-4 inches away from the connector and testing again. Could be bad connector.
#3
TECH Resident
iTrader: (4)
Join Date: Feb 2009
Location: Ohio
Posts: 784
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I'm assuming you probed the pink wire coming into the MAF with it unplugged? If you only have 7 volts there, you have a corroded connector, broken/cracked wire feeding the plug, or possibly a loose connector for the ENG1 fuse holder. You can try running a temporary jumper from the fuse to bypass the harness and connector to see if the code returns.
I'm not entirely sure what else is powered by that fuse, as all my documentation pertains to my stripped down harness that only has the MAF left on that circuit. If it powers something else, check for shorts and such there as well.
I'm not entirely sure what else is powered by that fuse, as all my documentation pertains to my stripped down harness that only has the MAF left on that circuit. If it powers something else, check for shorts and such there as well.
#6