I came across this clutch pedal and wildwood master cylinder combo on summit (link below) and was wondering if anyone had used it on a ls1 T56 swap. Based on my research the master has the right specs for the application and I think it would be easier to install than a fbody clutch pedal.

http://www.summitracing.com/parts/CMB-14-0011/

 

Looks like I am not getting any feedback. What about the master cylinder. Has anyone used the wildwood .75" bore, 1.10" stroke cylinder on their T56 with any
luck?

 

It looks like a good set up. I did use the Wilwood master cylinder. But I made my own mounts and adapted it.

 

I used the Wilwood and Turbo coupe pedal setup. If I did over I would not bother trying to find the Turbo coupe pedal ***. and just fab up an arm like Zipster came up with.