ford model A ls1 need harness help
Thread Starter
Teching In
Joined: Jul 2006
Posts: 26
Likes: 0
ford model A ls1 need harness help So im building a model a coupe/pickup project. im going to run a ls1 and a muncie 4-speed. the ls1 is a 98 f-body i believe, that i bought with no harness. i was given a harness from a 05 corvette with a ls2. it was a 24x tooth. ive got the intake, throttle body(dbw), ecm (e40 i think), and pedal assy. i would like to run all of it together. is it possible? i dont plan on running mass air, or 02 (cause of a lake style header). i just want the bare minimum. i looked around for sites with that vette harness with no luck like lt1swap or atleast missed it so what is the best thing to do? can i cut up the wiring to work? id give it a try if i can get some guidance . looking forward to some help, thanks
I think you should be able to convert the 05' harness to a standalone one ok and use all of the accessories, as long as you use all of the 05' Vette sensor and stuff, you just need to get it tuned.
What year is the Model A ?
Here is a picture of my buddy's 29 Pickup, blowen 350 w/4speed... not a LS1.. Originally built in the late 60's and a few times after.
BC
What year is the Model A ?
Here is a picture of my buddy's 29 Pickup, blowen 350 w/4speed... not a LS1.. Originally built in the late 60's and a few times after.
BC
Last edited by bczee; Apr 12, 2012 at 08:56 AM.
