Project Twin Turbo 83 S10
#24
Staging Lane
Thread Starter
Join Date: May 2012
Location: Atlanta, Ga
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
#26
Staging Lane
Thread Starter
Join Date: May 2012
Location: Atlanta, Ga
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
Heres some of the wiring, decided to rewire the entire truck because most of the stock wiring was unused anyway.
new fuse panel plate
panel installed
im also installing some modern touches to the electrical system that gm neglected to put into my truck. power windows, power locks, door pins w/under-dash lighting etc. this truck came with a 9vbattery powered light on the headliner with a little switch haha.
thanks! they're my favorite body style too.
new fuse panel plate
panel installed
im also installing some modern touches to the electrical system that gm neglected to put into my truck. power windows, power locks, door pins w/under-dash lighting etc. this truck came with a 9vbattery powered light on the headliner with a little switch haha.
thanks! they're my favorite body style too.
#29
Staging Lane
Thread Starter
Join Date: May 2012
Location: Atlanta, Ga
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
Thanks, wiring is my strong point lol.
Radiator relocation into the core support. Had to make some cuts and weld some sheet metal back in place where the cap goes to try to make it appear factory.
Radiator relocation into the core support. Had to make some cuts and weld some sheet metal back in place where the cap goes to try to make it appear factory.
#36
Staging Lane
Thread Starter
Join Date: May 2012
Location: Atlanta, Ga
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
Prepping the bed for a much needed bedliner
#37
Staging Lane
Thread Starter
Join Date: May 2012
Location: Atlanta, Ga
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
Heres a few pics of the dash im building for the truck...also known as the "worlds largest glovebox" by some haha. The opening is not a glovebox btw, its difficult to explain my plans for the dash but you will see when its finished.
Some Subaru seats I bought from Sarg
Some Subaru seats I bought from Sarg
#38
Launching!
iTrader: (1)
Join Date: Apr 2011
Location: Adamsville Tennessee
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
I like your fuse panel. Looks real nice. I need to send you some pics of my uncles drag s10. We only have 1/8 mile track, well almost 1/8, it's a few feet from. Anyways he has a sbc 383 and runs on average 6.7-6.9 at around 96mph. He got below 6.5 once with a throw away motor lol.. He didn't even run a head gasket, he used some brass compound to seal the heads, it lasted 3 passes.
Good luck and good work!
Good luck and good work!
#39
Staging Lane
Thread Starter
Join Date: May 2012
Location: Atlanta, Ga
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
I like your fuse panel. Looks real nice. I need to send you some pics of my uncles drag s10. We only have 1/8 mile track, well almost 1/8, it's a few feet from. Anyways he has a sbc 383 and runs on average 6.7-6.9 at around 96mph. He got below 6.5 once with a throw away motor lol.. He didn't even run a head gasket, he used some brass compound to seal the heads, it lasted 3 passes.
Good luck and good work!
Good luck and good work!
Im waiting on a few more parts to arrive so I can get the turbo kit rolling. I should have some pics up soon on the progress.