LS1 intake with truck DBW TB
#23
TECH Junkie
iTrader: (1)
Definitely a cheaper alternative to this, but if you want one already done:
http://www.foxlinders.com/
Btw, I set up a spare pump with the truck pulley in case mine goes out. You might want to keep your eyes open for a cheap ebay f body pump (I got mine for $85) and a used truck pump for the pulley ($10 locally on craigslist).
http://www.foxlinders.com/
Btw, I set up a spare pump with the truck pulley in case mine goes out. You might want to keep your eyes open for a cheap ebay f body pump (I got mine for $85) and a used truck pump for the pulley ($10 locally on craigslist).
Last edited by garys 68; 01-24-2013 at 06:25 AM.
#24
TECH Fanatic
Thread Starter
Definitely a cheaper alternative to this, but if you want one already done:
http://www.imagefap.com/photo/127537...s-%2870%29.jpg
Btw, I set up a spare pump with the truck pulley in case mine goes out. You might want to keep your eyes open for a cheap ebay f body pump (I got mine for $85) and a used truck pump for the pulley ($10 locally on craigslist).
http://www.imagefap.com/photo/127537...s-%2870%29.jpg
Btw, I set up a spare pump with the truck pulley in case mine goes out. You might want to keep your eyes open for a cheap ebay f body pump (I got mine for $85) and a used truck pump for the pulley ($10 locally on craigslist).
#26
TECH Fanatic
Thread Starter
#28
Or you could run the L99 WP it has the same spacing just have to cut alt bracket. Use a vette tensioner and different idle pulley (smaller). http://www.s10forum.com/forum/f213/c...ptions-468602/
All be it this may not be the cheapest option! haha
All be it this may not be the cheapest option! haha