My project for the GF
Engine bay was red before we just spray bombed it flat black for now.
Plan on doing something with the alum. intake piping sooner or later, still alot of things need done.
Plan on doing something with the alum. intake piping sooner or later, still alot of things need done.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
How i sits now. Took it for a 45 min drive today to touch up the VE tables(100* outside FTL) but wiring under the engine bay is all cleaned up wired in a switch so the gf can power the reverse solenoid to make it easier going into reverse. Gotta wire up and mount the oil pressure gauge and coolant gauge and get the speedo working.
Took it out tonight and tune is 95% done just need to lean it out a little above 6k rpms but ran out of time, but did put 100 miles on it. i did a 2nd gear roll to the top of 4th and this ****** moves.26" tire 4.08's and a H&C annnnnnd this is what it weighs with 1/2 tank of gas, before the swap it hit the scales at 2720 with 1/4 tank so i bet it only gained 10-20lbs with the ls1 and t-56 swap.
