Searching for AC brackets LS1/Vette Acc

Reply Subscribe

Thread Tools

Search this Thread

Jul 8, 2012 | 01:51 AM

1bigoldman

Thread Starter

On The Tree

Joined: Apr 2011

Posts: 129

Likes: 0

From: Vancouver, WA

Searching for AC brackets LS1/Vette Acc

As stated in the title I am using a LS1 and accessories from a Corvette. I am also using 1" setback adapter plates. I would like to mount the AC compressor in the stock location. I would also like to use a Sanden 508 if possible, if not then a SD7. Does anybody make a bracket for my application?

Thanks for you input.

Dhamen

Jul 8, 2012 | 03:43 AM

garys 68

TECH Junkie

iTrader: (1)

Joined: Dec 2007

Posts: 3,724

Likes: 39

From: Camdenton, MO

Couple possibilities. First bracket is available through Vintage Air for either f body or corvette (page 61).
http://www.vintageair.com/catalog.asp

http://preview.hhclassic.com/catalog...85f2466636526c

http://www.alangrovecomponents.com/LS.htm

Last edited by garys 68; Jul 8, 2012 at 04:04 AM.

Jul 8, 2012 | 12:11 PM

1bigoldman

Thread Starter

On The Tree

Joined: Apr 2011

Posts: 129

Likes: 0

From: Vancouver, WA

Quote:

Originally Posted by garys 68

Thank you for the links.

I forgot to mention that I only have 14" of clearance from the crank centerline. Also I am unable to reuse the factory brackets as they run into my motor mount with the 1" setback.

Jul 8, 2012 | 12:59 PM

Rocketrod

TECH Enthusiast

iTrader: (2)

Joined: Jan 2005

Posts: 540

Likes: 2

From: Metamora, IL

Quote:

Originally Posted by 1bigoldman

FYI - I am using S&P brackets for the LS2 install in a 69 Camaro and with a little trimming off the adapter plates and the corvette a/c bracket I was able to bolt it in place. Without notching the frame I will have to use an SD7 compressor.