Windage trays all the same? Getting a GTO crate motor...
#1
TECH Fanatic
Thread Starter
iTrader: (9)
Join Date: Dec 2006
Location: Va Beach
Posts: 1,240
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
LS1 swap into a Panoz. Going to use a Kevco baffled LS1 F-body road race pan and corresponding pickup tube. Just wanted to make sure I won't run into any issues with the windage tray that comes in a GTO front sump crate motor? I'd remove the pan and pickup and completely replace with the Kevco bits. Can anyone confirm I'm not missing anything?
Thanks,
Brian
Crate engine setup
![](http://image.highperformancepontiac.com/f/8615504/0411pon_25z+2004_pontiac_gto+oil_pan.jpg)
Kevco pan
Thanks,
Brian
Crate engine setup
![](http://image.highperformancepontiac.com/f/8615504/0411pon_25z+2004_pontiac_gto+oil_pan.jpg)
Kevco pan
![](http://www.kevkoracing.com/images/LS_F_body_full.gif)