LS wiring harness PSI- modern vintage or speartech
#23
My harness is not the best example for pictures as I integrated my factory a-body harness into the PSI harness. What I must say is how well Jon has treated me since I purchased my harness. I have called/email several times or the last year. I started out with an LY6, swapping out the fuel rails, intake including the map, switched over the card style maf, LS3 alternator, decided to add oil pressure output to the PMC, with all of the changes, some included in the original harness build and some well after the fact. Jon’s response time is outstanding, weekends are no exception. Even when your problem is self induced he will call you on a Saturday night and get you back on track. I purchased my harness, had him reprogram my PCM and TCM, purchased extra harness tape was supplied with extra canon plugs replacement terminals and was assisted with the integration with the rest of the a-body harness. The harness fits well, wire has some slack but don’t hang out everywhere, it was complete and I have not found a fault with the craftsmanship of their work. He is an all round good guy, call him and chat, you won't regret it.
Ron
Ron
#25
My harness is not the best example for pictures as I integrated my factory a-body harness into the PSI harness. What I must say is how well Jon has treated me since I purchased my harness. I have called/email several times or the last year. I started out with an LY6, swapping out the fuel rails, intake including the map, switched over the card style maf, LS3 alternator, decided to add oil pressure output to the PMC, with all of the changes, some included in the original harness build and some well after the fact. Jon’s response time is outstanding, weekends are no exception. Even when your problem is self induced he will call you on a Saturday night and get you back on track. I purchased my harness, had him reprogram my PCM and TCM, purchased extra harness tape was supplied with extra canon plugs replacement terminals and was assisted with the integration with the rest of the a-body harness. The harness fits well, wire has some slack but don’t hang out everywhere, it was complete and I have not found a fault with the craftsmanship of their work. He is an all round good guy, call him and chat, you won't regret it.
Ron
Ron
#26
#28
PSI = Great customer support
#31
Anyone thinking about the long term relaibility
I think I was one of the first to purchase their harness on this site. I bought form them when they were just selling them on eBay.
I think it's been 3 or 4 years now and no hiccups. I actually replaced the factory harness because i was having connection issues with it and they havent been an issue since swapping over to the PSI harness.
I think I was one of the first to purchase their harness on this site. I bought form them when they were just selling them on eBay.
I think it's been 3 or 4 years now and no hiccups. I actually replaced the factory harness because i was having connection issues with it and they havent been an issue since swapping over to the PSI harness.
#32
Ok I have narrowed my harness & tune down to speartech or PSI. I just have a few questions.
PSI harness includes fuse and relay panel does speartech or do you have to add your on for fans etc.
Does anyone run the PSI LS2 58x with 6l80 harness and tune package? If so do you have tap shift functional.
Will a speartech tap shift toggle switch and box funtion with the PSI harness and tune? Jon says it will I would just like verification from someone using it.
Thanks
Rocky
PSI harness includes fuse and relay panel does speartech or do you have to add your on for fans etc.
Does anyone run the PSI LS2 58x with 6l80 harness and tune package? If so do you have tap shift functional.
Will a speartech tap shift toggle switch and box funtion with the PSI harness and tune? Jon says it will I would just like verification from someone using it.
Thanks
Rocky
Last edited by rockytopper; 08-02-2015 at 05:21 PM.
#33
I have only had experience with PSI. My harness worked great however I was a little un satisfied with the support but maybe I'm hard to please. I just feel like after I leave a voice mail I shouldn't have to call again within 24 hours only to leave another voice mail. Apparently e-mail is the prefered method of communication, however I hate e-mails. I like to speak with someone directly and in a timely manner.
#34
I have only had experience with PSI. My harness worked great however I was a little un satisfied with the support but maybe I'm hard to please. I just feel like after I leave a voice mail I shouldn't have to call again within 24 hours only to leave another voice mail. Apparently e-mail is the prefered method of communication, however I hate e-mails. I like to speak with someone directly and in a timely manner.
#35
We offer a 6l80e kit with controller, pedal etc, or a standalone harness, both will be specific for the engine and trans combo you are running. We use factory wiring and ecm/tcm, so anyone's shifter will work.
http://secure.ultracart.com/catalog/.../KIT-1071.html
http://secure.ultracart.com/catalog/...X/6L80E-6L90E/
You can give us a call at 732-444-3277, or email or message us on facebook. We have a GM A tech, Gary, on call 8-5 monday through friday.
http://secure.ultracart.com/catalog/.../KIT-1071.html
http://secure.ultracart.com/catalog/...X/6L80E-6L90E/
You can give us a call at 732-444-3277, or email or message us on facebook. We have a GM A tech, Gary, on call 8-5 monday through friday.
__________________
Your Source for LSX Conversion Parts!
www.psiconversion.com
Ebay Store
Facebook/psiconversion
Instagram/psiconversion
'Dont Let EFI Pass You By!'
Your Source for LSX Conversion Parts!
www.psiconversion.com
Ebay Store
Facebook/psiconversion
Instagram/psiconversion
'Dont Let EFI Pass You By!'