2003 S10 L33 5.3 Swap
#1
Launching!
Thread Starter
iTrader: (3)
Join Date: Sep 2011
Posts: 264
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Been lurking around here for a while learning & researching my swap so here it is.
2003 S10 ext cab ZQ8 with 4.3 V6 which has been a good truck but poor gas mileage & not as much power as a V8 made it pretty much a no brainer as far as swaps.
![](http://i1110.photobucket.com/albums/h441/waterworxx/S10Build015.jpg)
![](http://i1110.photobucket.com/albums/h441/waterworxx/misc10013.jpg)
The goal was to keep it a daily driver & to have everything in the truck work just like stock,turn the key & go & have all the daily niceties like cruise control,AC,all stock gauges work,etc.
2003 S10 ext cab ZQ8 with 4.3 V6 which has been a good truck but poor gas mileage & not as much power as a V8 made it pretty much a no brainer as far as swaps.
![](http://i1110.photobucket.com/albums/h441/waterworxx/S10Build015.jpg)
![](http://i1110.photobucket.com/albums/h441/waterworxx/misc10013.jpg)
The goal was to keep it a daily driver & to have everything in the truck work just like stock,turn the key & go & have all the daily niceties like cruise control,AC,all stock gauges work,etc.
#2
Launching!
Thread Starter
iTrader: (3)
Join Date: Sep 2011
Posts: 264
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I had been modifing the truck since I owned it,so it had a lot of stuff already done to it.
It is a 2003 S10 with ZQ8 suspension package which includes lowered front & rear,bigger swaybar in front & swaybar in rear,quick ratio steering box,hop shock,16 inch wheels & this is a LS model so it is loaded inside,power windows,locks,cruise,tilt,gauges,etc.
Tubular upper A arms,tall upper ball joints,drilled & slotted dics brakes,stainless brake lines,Flaming River steering joint are a few mods I have made to the suspension/brakes.
It is a 2003 S10 with ZQ8 suspension package which includes lowered front & rear,bigger swaybar in front & swaybar in rear,quick ratio steering box,hop shock,16 inch wheels & this is a LS model so it is loaded inside,power windows,locks,cruise,tilt,gauges,etc.
Tubular upper A arms,tall upper ball joints,drilled & slotted dics brakes,stainless brake lines,Flaming River steering joint are a few mods I have made to the suspension/brakes.
![](http://i1110.photobucket.com/albums/h441/waterworxx/STruck047.jpg)
#5
Launching!
Thread Starter
iTrader: (3)
Join Date: Sep 2011
Posts: 264
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Picked up a wiring harness & pcm from a 2002 Silverado
![](http://i1110.photobucket.com/albums/h441/waterworxx/S10Build012.jpg)
Bought a used L33 aluminum 5.3 bottom end for $500 shipped. Aluminum block,flat top pistons,floating wrist pin rods,HO cam.
![](http://i1110.photobucket.com/albums/h441/waterworxx/S10Build001.jpg)
![](http://i1110.photobucket.com/albums/h441/waterworxx/S10Build002.jpg)
I disassembled the motor & found a couple spun rod bearings so I bought a crank that was turned 10-10 had the clys honed,new cam bearings installed by the local machine shop.
![](http://i1110.photobucket.com/albums/h441/waterworxx/S10Build003.jpg)
![](http://i1110.photobucket.com/albums/h441/waterworxx/S10Build012.jpg)
Bought a used L33 aluminum 5.3 bottom end for $500 shipped. Aluminum block,flat top pistons,floating wrist pin rods,HO cam.
![](http://i1110.photobucket.com/albums/h441/waterworxx/S10Build001.jpg)
![](http://i1110.photobucket.com/albums/h441/waterworxx/S10Build002.jpg)
I disassembled the motor & found a couple spun rod bearings so I bought a crank that was turned 10-10 had the clys honed,new cam bearings installed by the local machine shop.
![](http://i1110.photobucket.com/albums/h441/waterworxx/S10Build003.jpg)
![](http://i1110.photobucket.com/albums/h441/waterworxx/S10Build006.jpg)
#6
Launching!
Thread Starter
iTrader: (3)
Join Date: Sep 2011
Posts: 264
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Reassembled the motor with new std rings,new Clevite 77 main & rod bearings,Cloyes timing chain,Melling oil pump,ARP rod bolts,New oem main bolts,Comp cams trunnion upgrade.
![](http://i1110.photobucket.com/albums/h441/waterworxx/S10Build049.jpg)
Used MLS head gaskets with a pair of LS1 heads milled .015 & new oem head bolts.
![](http://i1110.photobucket.com/albums/h441/waterworxx/Misc1015.jpg)
![](http://i1110.photobucket.com/albums/h441/waterworxx/S10Build049.jpg)
Used MLS head gaskets with a pair of LS1 heads milled .015 & new oem head bolts.
![](http://i1110.photobucket.com/albums/h441/waterworxx/Misc1015.jpg)
![](http://i1110.photobucket.com/albums/h441/waterworxx/Misc1013.jpg)
#7
Launching!
Thread Starter
iTrader: (3)
Join Date: Sep 2011
Posts: 264
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
![](http://i1110.photobucket.com/albums/h441/waterworxx/Misc1038.jpg)
I used the truck acc setup so with the Corvette water pump I had to cut the alt bracket & relocate the idler pulley with a Dirty Dingo bracket & also makes room for the LS1 intake/throttle body. And a pic of the POTZ ported throttle body.
![](http://i1110.photobucket.com/albums/h441/waterworxx/Misc1045.jpg)
![](http://i1110.photobucket.com/albums/h441/waterworxx/Misc1046.jpg)
![](http://i1110.photobucket.com/albums/h441/waterworxx/Misc1036.jpg)
Last edited by ZQ8LS1; 08-05-2012 at 02:18 PM.
Trending Topics
#11
Launching!
Thread Starter
iTrader: (3)
Join Date: Sep 2011
Posts: 264
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Setting the 5.3 in for its first test fit.
![](http://i1110.photobucket.com/albums/h441/waterworxx/Misc1109.jpg)
Pic of header clearance on passenger side. The area of the firewall buy the collector needs some serious massaging with a hammer to gain enough clearance to get your tools into tighten collector bolts. While we are on the topic of collector bolts...do yourself a favor & invest in Stage 8 hardware http://stage8.com/ for your collector & flange bolts as you dont want them coming loose after your build & they will,take my word on that. LOL
![](http://i1110.photobucket.com/albums/h441/waterworxx/Misc1105.jpg)
![](http://i1110.photobucket.com/albums/h441/waterworxx/Misc1106.jpg)
I put some heat shield under the ac box where #8 header pipe came real close.
![](http://i1110.photobucket.com/albums/h441/waterworxx/Misc1109.jpg)
Pic of header clearance on passenger side. The area of the firewall buy the collector needs some serious massaging with a hammer to gain enough clearance to get your tools into tighten collector bolts. While we are on the topic of collector bolts...do yourself a favor & invest in Stage 8 hardware http://stage8.com/ for your collector & flange bolts as you dont want them coming loose after your build & they will,take my word on that. LOL
![](http://i1110.photobucket.com/albums/h441/waterworxx/Misc1105.jpg)
![](http://i1110.photobucket.com/albums/h441/waterworxx/Misc1106.jpg)
I put some heat shield under the ac box where #8 header pipe came real close.
#16
Launching!
Thread Starter
iTrader: (3)
Join Date: Sep 2011
Posts: 264
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I was getting ready to build a custom steering shaft & found out if you put a couple washers between the steering box on the front two mounting bolts it kicks the steering shaft out a bit & I gained some much needed clearance on #3 cyl.