Conversions & Swaps LSX Engines in Non-LSX Vehicles
Sponsored by:
Sponsored by:

89 fox gt semi built lq4 swap!

Thread Tools
 
Search this Thread
 
Old 01-14-2013, 10:20 PM
  #61  
On The Tree
Thread Starter
iTrader: (4)
 
Builtz71's Avatar
 
Join Date: Feb 2012
Location: Oklahoma City,Ok
Posts: 167
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by TopNotchLSX
What I did with my sound deadener is I used a putty knife with a 2.5 inch wide blade and chisseled away using a mallet. Worked out very well and didn't take too much time.
Been a little busy with work,but I'll give it a try before I buy dry ice!thanks
Old 01-14-2013, 10:28 PM
  #62  
On The Tree
Thread Starter
iTrader: (4)
 
Builtz71's Avatar
 
Join Date: Feb 2012
Location: Oklahoma City,Ok
Posts: 167
Likes: 0
Received 0 Likes on 0 Posts
Default

I got all my heater and coolant hoses ran and hooked up..probably couldn't tell in previous pics..but the intake and carb were just sitting on there..so went ahead and bolted all of it down..bolted the headers on for good now,btw was a PITA with the trans installed..still need to mount the battery box in,and run the wires..waiting to get the sound deadening up first..saving money for Florida 5.0 cluster,and the drive line..gonna wait to fire it up until I get gauges for it...here is a motor pic with everything above done

Old 01-21-2013, 10:55 PM
  #63  
On The Tree
Thread Starter
iTrader: (4)
 
Builtz71's Avatar
 
Join Date: Feb 2012
Location: Oklahoma City,Ok
Posts: 167
Likes: 0
Received 0 Likes on 0 Posts
Default

I got my tranny cooler mounted..going to run my trans lines some time this week..I made another order to summit for a couple little things..ordered mufflers,trans temp gauge,throttle cable bracket,positive power post to run my battery,new air filter to get away from the paper element,another shifter cable since mine was broke..got some extra money..not sure if I should order my gauges,or a driveshaft???

Old 01-24-2013, 11:25 PM
  #64  
On The Tree
Thread Starter
iTrader: (4)
 
Builtz71's Avatar
 
Join Date: Feb 2012
Location: Oklahoma City,Ok
Posts: 167
Likes: 0
Received 0 Likes on 0 Posts
Default

I got a few more parts in today..I got the throttle cable in and mounted..new trans cable in..ordered my driveshaft today,from driveshaft specialist..new air filter,got away from the paper element..painted the chrome air cleaner black,then my gf wanted to add her touch..it's starting to grow on me!..couple other small things,still need to mount my battery box.


Old 01-29-2013, 08:33 PM
  #65  
On The Tree
Thread Starter
iTrader: (4)
 
Builtz71's Avatar
 
Join Date: Feb 2012
Location: Oklahoma City,Ok
Posts: 167
Likes: 0
Received 0 Likes on 0 Posts
Default

I'm finishing my build on hybrid ponies!..if you want keep up with it,it will be on there..link below..
http://hybridpony.boards.net/thread/...q4-swap?page=2
Old 01-31-2013, 11:01 PM
  #66  
On The Tree
Thread Starter
iTrader: (4)
 
Builtz71's Avatar
 
Join Date: Feb 2012
Location: Oklahoma City,Ok
Posts: 167
Likes: 0
Received 0 Likes on 0 Posts
Default

Well finished up the wiring tonight..she busted right off..couldn't be happier!

Old 02-01-2013, 12:18 AM
  #67  
Launching!
 
cprmn14's Avatar
 
Join Date: Oct 2011
Location: Dixon, IL
Posts: 284
Likes: 0
Received 0 Likes on 0 Posts
Default

congrats!
Old 02-01-2013, 09:33 AM
  #68  
Launching!
iTrader: (6)
 
MIKE93SVT's Avatar
 
Join Date: Jul 2010
Posts: 220
Likes: 0
Received 0 Likes on 0 Posts
Default

nice, second greatest feeling behind driving it for the first time.



Quick Reply: 89 fox gt semi built lq4 swap!



All times are GMT -5. The time now is 01:53 PM.