5.3 s10
Thread Starter
Joined: Sep 2012
Posts: 257
Likes: 18
From: Colorado Springs, CO
Well for anyone wondering about the U0107 code about losing communication with the tac module, it turns out that the power to the tac should have been to the start/run/crank instead of ign. I got that part rewired and then no more CEL or any other codes.
Thread Starter
Joined: Sep 2012
Posts: 257
Likes: 18
From: Colorado Springs, CO
I ended up using the 01 style compressor and the 4.3 hose assembly. It worked like a charm! A few new things I have done include 1.5" spacers/adapters and 2012 camaro steel wheels and I had to take the 2" drop coils off the front and go stock to get a true 2" drop with the weight of the v8. Also thanks to a bad front u joint I replaced the transmission and added a corvette servo and wow what a difference!
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
