240 Wagon Lm7/t56 build
#141
Since it's hot now, I've been having some cooling issues. Really wanted to run a Mark VIII fan, but in order to do so, I had to move radiator and intercooler forward as much as possible. Ton of work, but looks great, and have plenty of room for this new monster fan.
Also, now my radiator isn't right up against the turbo blanket.
Also, now my radiator isn't right up against the turbo blanket.
#143
Did a little of this:
Then a litte of this [with 5 people in the car] - Yes, I know the car is running very rich.
Then this was the result :/
228,000 miles on the stock dana30 rear end. For the price of new bearings, I can swap an 8.8 in it. So, I'm headed to the JY tomorrow to snag an exploder posi rear end with a slightly lower ring gear (3.55).
Then a litte of this [with 5 people in the car] - Yes, I know the car is running very rich.
Then this was the result :/
228,000 miles on the stock dana30 rear end. For the price of new bearings, I can swap an 8.8 in it. So, I'm headed to the JY tomorrow to snag an exploder posi rear end with a slightly lower ring gear (3.55).
#145
First run ever at the track probably in the cars existence.
8.95 @ 86mph. 3-5 lbs of boost, shifting below 5k (top end of tune was lean at the time).
Car is now on 10 lbs, still a really conservative tune. Waiting for my new wheels to get here (being widened right now), then drag radials and back to the track.
Probably going to do a turbo cam soon.
8.95 @ 86mph. 3-5 lbs of boost, shifting below 5k (top end of tune was lean at the time).
Car is now on 10 lbs, still a really conservative tune. Waiting for my new wheels to get here (being widened right now), then drag radials and back to the track.
Probably going to do a turbo cam soon.
Last edited by onetype; 09-05-2013 at 01:14 PM.
#147
Still waiting on my wheels. Sitting at Stockton getting widened. Cut a coil off the rear to even out the rake a little. I want to raise the boost to 12-15, but I'm not sure the trans internals are up to it.
Sold my '31, probably going to start a new project soon.
Sold my '31, probably going to start a new project soon.
#148
I just signed up for LS1Tech.com to say this;
I am building up a 245 with a 330 HP carburated small block, but seeing this build of yours
MAKES ME WANT TO BE A BETTER MAN!!!
KEEP UP THE AWESOME WORK!
and check out www.smallworldprojects.com if you wanna see my blog on the build.
I am building up a 245 with a 330 HP carburated small block, but seeing this build of yours
MAKES ME WANT TO BE A BETTER MAN!!!
KEEP UP THE AWESOME WORK!
and check out www.smallworldprojects.com if you wanna see my blog on the build.
#150
New wheels finally showed up. Custom 17x8 6" BS Steelies. LM Replica's were too flashy for my liking. And it was cheaper to have these built than replace my LM's in 114.3
Could have probably fit a 9" 6.5 BS". Oh well, 255 DR's will work.
Could have probably fit a 9" 6.5 BS". Oh well, 255 DR's will work.
#151
Looks kinda funky because it hasn't settled and my driveway slants right at the front door.
Flipping my turbo 180 degrees, re working the downpipe, re wiring it, and ordering a set of 17x9 LM Replicas to match the front. Will run an ET street on the steelies for the track.
Flipping my turbo 180 degrees, re working the downpipe, re wiring it, and ordering a set of 17x9 LM Replicas to match the front. Will run an ET street on the steelies for the track.
#154
17x9 +35mm on 255/40/17 NT05's
And day 2 I already regret buying another set of those cheap knockoffs.
So I ordered 17x8/17x9 Weld RTS'. Now I just have to wait a month for them to get here :/
And day 2 I already regret buying another set of those cheap knockoffs.
So I ordered 17x8/17x9 Weld RTS'. Now I just have to wait a month for them to get here :/
#156
My thoughts exactly. I just ordered the polished as I think it will look better against the dark color of the car. Don't think anyone has ever put them on a Volvo before.
Now I just have to wait almost a month for them to get here :/
Now I just have to wait almost a month for them to get here :/
Last edited by onetype; 01-06-2014 at 03:52 PM.
#159
Tore the rear end apart yesterday to get a working parking brake. I have to register it in Texas in a few months, and although I am going to register it antique, I still have to deal with the initial green sheet inspection.
Just waiting on some 8.8 clevis ends then I can adapt some Volvo parking brake cables I picked up at the PNP to it.
Just waiting on some 8.8 clevis ends then I can adapt some Volvo parking brake cables I picked up at the PNP to it.
#160
Rewired the car finally. Looks a lot better.
Converted to a flat glass rear hatch. Shaved squirter and wiper blade.
IPD 25mm Sway bars front/rear
Building a small 2-2.5" cowl hood for the car now.
Getting a new tune soon hopefully.
Converted to a flat glass rear hatch. Shaved squirter and wiper blade.
IPD 25mm Sway bars front/rear
Building a small 2-2.5" cowl hood for the car now.
Getting a new tune soon hopefully.