BP Automotive, and introduction thread.

Reply Subscribe

Thread Tools

Search this Thread

11-29-2012, 07:14 PM

BP Automotive

LS1Tech Sponsor

Thread Starter

iTrader: (3)

Join Date: Oct 2012

Location: Columbia, Kentucky

Posts: 641

Likes: 1

Received 1 Like on 1 Post

BP Automotive, and introduction thread.

Hey guys, this is green96ta. I am now a site vendor, so I can advertise on the boards now. A lot of you already know me and what I do. I will continually update this thread with any new products or hard to find things that you members will be looking for. I will even have some things for you hardcore DIY guys!

First off, my name is Bill. I am originally from Indiana, but I currently reside in KY. Cars have been a VERY important part of my life, even from a very early age. My father owned his own shop and he eventually restored a 57 vette that had sat in the backyard for as long as I could remember. Unfortunately, he suddenly passed away not long after.

I spent 4 year in the U.S. Marines in my early twenties, and this is where my life changed. I actually got to learn what my father had been trying to teach me so early in life, and up until he passed when I was 14. I learned attention to detail, and if something is worth doing-its worth doing right. I got out of the Corps after my 4 years and not long after I joined the Kentucky Army National Guard, in which I still serve today. So if you are military or a veteran, I will give you the best deal I can. Active duty, reserve, guard, or veteran.

In my signature you will find my website and my Ebay store. My site is still under construction, so please bear with me for the building process. You can find my contact info there, just call and I will take care of any questions you have.

I will be updating this thread periodically with pictures and pricing for you guys, and if your curious about anything just pm me or call me.

Here is some pricing for you guys, I will get the pictures of the base harness up asap.

Base LSX 24x Stand Alone Harness $450 DBC $480 DBW (Re-Wire of a factory harness with this kit is $250)
-Two Relays
-8 way unsealed fuse block
-4 ft length for installation into the passenger compartment.
-Fuse block and Dash Harness are both disconnect-able, just like a factory harness to aid in harness installation.
-Starter Solenoid wire included, also disconnect-able.
-Fan Control wiring for those that want to run their own fans.
-GM Color codes for easy circuit identification and installation.
-Harness is labeled for a fool proof installation!
-Easy instructions!
-Hand Built by me to my personal strict standards.

Premium LSX 24x Stand Alone Harness $550 DBC $580 DBW (Re-Wire of a factory harness with this kit is $350)
-7 Total Relays. A/C Compressor Relay, A/C Fan Relay, Two Fan Relays, Ignition Power Relay, Starter Relay, and a Fuel Pump Relay
-12 way unsealed fuse block
-4 ft length for installation into the passenger compartment.
-Fuse block is disconnect-able, just like a factory harness to aid in harness installation.
-Starter wiring included.
-GM Color codes for easy circuit identification and installation.
-Harness is labeled for a fool proof installation!
-Easy instructions!
-Hand Built by me to my personal strict standards.
-Factory quality Delphi fuse and relay center with labeled covers!
-This is a complete kit ready to rock and roll!

Pictures of a premium stand alone kit. The first couple pictures are of a factory F-body harness that I re-wired. The next ones are a stand alone harness for a LSX swapped mustang. That customer opted for integrated neutral safety wiring, he had functional nss with that harness. That can be done with most setups for a small additional charge.

Bill
BP Automotive
Contact

__________________

Standalone LS Swap Harnesses IN STOCK!
LSX, LTX Stand alone swap harnesses. S10 LSX conversion PLUG AND PLAY harnesses, 24x conversion PLUG AND PLAY harnesses. LT1 to LSX PLUG AND PLAY Harnesses.
sales@bp-automotive.com
www.bp-automotive.com
1-888-467-4491

Last edited by BP Automotive; 11-29-2012 at 11:36 PM.