1970 Nova LY6 TT build
#141
On The Tree
Thread Starter
Join Date: Sep 2009
Location: Mentor , Ohio
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Here's the shot of it. Also u'll see my turbo support better. If u see the opening under intercooler , that's where the radiator will lay down like LS1NOVA did.
#143
TECH Addict
iTrader: (1)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Ah. I didn't realize you planned to lay the radiator on an angle in there. That'll be a real nice use of space. I found pics of LS1NOVA's setup here: https://ls1tech.com/forums/forced-in...ntal-here.html. Great work - carry on!
#144
On The Tree
Thread Starter
Join Date: Sep 2009
Location: Mentor , Ohio
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Ah. I didn't realize you planned to lay the radiator on an angle in there. That'll be a real nice use of space. I found pics of LS1NOVA's setup here: https://ls1tech.com/forums/forced-in...ntal-here.html. Great work - carry on!
No problem , sometimes I SUCK @ communication . that my fiancé says , LOL.
#146
On The Tree
Thread Starter
Join Date: Sep 2009
Location: Mentor , Ohio
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
#150
On The Tree
Thread Starter
Join Date: Sep 2009
Location: Mentor , Ohio
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
This is just a little update , I'm gonna box the ends where I cut the upper core support then install threaded inserts so I can bolt the intercooler on core support , I'm gonna brace the core support after I cut opening for the air filter. Then gonna make a 1/4 or 3/8 CM round tubing go around the intercooler & bolt it to the threaded insert on core support & that will act like I never cut the core support.
#151
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I love it. That's a real nice looking setup!!! Any othe pics showing the side views?
thanks,
Jim
thanks,
Jim
#152
On The Tree
Thread Starter
Join Date: Sep 2009
Location: Mentor , Ohio
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
#154
On The Tree
Thread Starter
Join Date: Sep 2009
Location: Mentor , Ohio
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I'm thinking of selling the Nova , I'm gonna finish the hot & cold pipes , fuel lines & wiring , then it should be running & driving by spring , if interested let me know , I'm asking $30,000. Thank u all.
#156
On The Tree
Thread Starter
Join Date: Sep 2009
Location: Mentor , Ohio
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Thank for reading this , it's nowhere like urs , ur car is beautiful & love the green color. Believe me , I don't want to sell it but , I'm trying to save my home from BS situation. I found that surge tank from summit. Did u just weld 2 of -16 or -20 an bungs on surge tank. 1st one on top side for upper outlet on WP & the other bung on bottom of surge tank that goes to upper radiator hose. Should my steam port be lower than the upper hose on the surge tank so it doesn't get air ?? I'm used to having a remote filler next & be done w/ it. I have this Snap On Cooling refill er to eliminate any air.
#158
On The Tree
Thread Starter
Join Date: Sep 2009
Location: Mentor , Ohio
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
#159
On The Tree
Thread Starter
Join Date: Sep 2009
Location: Mentor , Ohio
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Here's an update , got 4 tabs welded on the fuel cell so it can be boiled underneath the frame rails & on top of cell is level w/ top frame rails so I can lay tin on top & install a cess door to fill up. The dash pad is done , now to recover it w/ Scat Pro Car black seat material so it match my seats.