Conversions & Swaps LSX Engines in Non-LSX Vehicles
Sponsored by:
Sponsored by:

67 Cutlass Convertible LY6 Project

Thread Tools
 
Search this Thread
 
Old 12-29-2012 | 09:05 PM
  #1  
kanner1's Avatar
Thread Starter
Staging Lane
 
Joined: Apr 2008
Posts: 63
Likes: 0
From: Savannah, GA
Default 67 Cutlass Convertible LY6 Project

Well I know I have hit up enough members here for help so I might as well post some pics! Car started as a very clean all original 330 Jetfire. Now its sporting a cammed LY6, LS3 intake, DBW, 4L85e, 9inch and all the rest of the usual suspects.
Attached Thumbnails 67 Cutlass Convertible LY6 Project-copy-dsc01375.jpg   67 Cutlass Convertible LY6 Project-copy-2-dsc01362.jpg   67 Cutlass Convertible LY6 Project-p1000989.jpg   67 Cutlass Convertible LY6 Project-img_0131.jpg   67 Cutlass Convertible LY6 Project-img_0132.jpg  

Old 12-29-2012 | 09:10 PM
  #2  
kanner1's Avatar
Thread Starter
Staging Lane
 
Joined: Apr 2008
Posts: 63
Likes: 0
From: Savannah, GA
Default

more build pics
Attached Thumbnails 67 Cutlass Convertible LY6 Project-img_0173.jpg   67 Cutlass Convertible LY6 Project-img_0360.jpg   67 Cutlass Convertible LY6 Project-img_0380.jpg  
Old 12-29-2012 | 09:21 PM
  #3  
kanner1's Avatar
Thread Starter
Staging Lane
 
Joined: Apr 2008
Posts: 63
Likes: 0
From: Savannah, GA
Default

prepping for the transplant..painless harness for the car, PSI Harness for the drivetrain, griffin radiator, new disk brake 9 inch 3:70 is in, new EFI tank in place & Autometer guages in the original spot.
Attached Thumbnails 67 Cutlass Convertible LY6 Project-img_0383.jpg   67 Cutlass Convertible LY6 Project-img_0384.jpg   67 Cutlass Convertible LY6 Project-img_0386.jpg   67 Cutlass Convertible LY6 Project-img_0492.jpg  
Old 12-29-2012 | 09:27 PM
  #4  
kanner1's Avatar
Thread Starter
Staging Lane
 
Joined: Apr 2008
Posts: 63
Likes: 0
From: Savannah, GA
Default

New shoes are in..Staggered Daytona wheels 17/18 with Nitto 555's, motor is a 2009 LY6 & 4L85e..mast cam & springs, camarao intake / injectors, & truck dbw
Attached Thumbnails 67 Cutlass Convertible LY6 Project-img_0162.jpg   67 Cutlass Convertible LY6 Project-img_0496.jpg   67 Cutlass Convertible LY6 Project-img_0501.jpg   67 Cutlass Convertible LY6 Project-img_0498.jpg  
Old 12-29-2012 | 09:34 PM
  #5  
kanner1's Avatar
Thread Starter
Staging Lane
 
Joined: Apr 2008
Posts: 63
Likes: 0
From: Savannah, GA
Default

smooth install, used the hooker adapter plates, competition engineering solid mounts on the block & oem chevelle frame pads below...now onto the wiring.
Attached Thumbnails 67 Cutlass Convertible LY6 Project-img_0502.jpg   67 Cutlass Convertible LY6 Project-img_0513.jpg   67 Cutlass Convertible LY6 Project-img_0511.jpg  
Old 12-29-2012 | 09:40 PM
  #6  
kanner1's Avatar
Thread Starter
Staging Lane
 
Joined: Apr 2008
Posts: 63
Likes: 0
From: Savannah, GA
Default

Its getting there & looks right at home...I tried both truck & corvette exhaust manifolds neither would work so I ordered Hooker LS Swap headers & 3" full exhaust from PYPES. Both fit extremely well.
Attached Thumbnails 67 Cutlass Convertible LY6 Project-img_0514.jpg   67 Cutlass Convertible LY6 Project-img_0516.jpg   67 Cutlass Convertible LY6 Project-img_0517.jpg  
Old 12-29-2012 | 09:46 PM
  #7  
kanner1's Avatar
Thread Starter
Staging Lane
 
Joined: Apr 2008
Posts: 63
Likes: 0
From: Savannah, GA
Default

Wrapping things up and off to the tuners we go. HUGE thank you to Larry @ Burkes Performance in Rincon GA for helping me get things right. He moved the ecm & tcm inside & under the dash, cleaned up all my wiring mistakes & got my baby running.
Attached Thumbnails 67 Cutlass Convertible LY6 Project-img_0525.jpg   67 Cutlass Convertible LY6 Project-img_0526.jpg   67 Cutlass Convertible LY6 Project-img_0813.jpg   67 Cutlass Convertible LY6 Project-img_0817.jpg  
Old 12-29-2012 | 09:51 PM
  #8  
RJDio's Avatar
TECH Enthusiast
 
Joined: Nov 2012
Posts: 555
Likes: 0
From: NearHouston, TX
Default

OMG dude! that is sick. Me an old school Olds guy, first car a '69 442, then a '77 442, then a '86 442. okay I was stuck in same book different chapters. Awesome what you did, I'm sure is a hit in car shows. Thanks for sharing!
Old 12-29-2012 | 09:55 PM
  #9  
kanner1's Avatar
Thread Starter
Staging Lane
 
Joined: Apr 2008
Posts: 63
Likes: 0
From: Savannah, GA
Default

Thanks!! Ive always liked Olds also, had a 69' conv, 71' W30, 77' 442 & an 85 also over the years plus an 88 & 98 that I robbed for parts! Im starting to really put some miles on this thing now...& yes it's a big hit at shows and everywhere we drive it. As you can tell by the boy in the trunk..kids arent as impressed!!!
Attached Thumbnails 67 Cutlass Convertible LY6 Project-img_0974.jpg   67 Cutlass Convertible LY6 Project-img_1139.jpg   67 Cutlass Convertible LY6 Project-img_1142.jpg   67 Cutlass Convertible LY6 Project-img_1152.jpg  
Old 12-29-2012 | 10:01 PM
  #10  
RJDio's Avatar
TECH Enthusiast
 
Joined: Nov 2012
Posts: 555
Likes: 0
From: NearHouston, TX
Default

Like my 17 year old at the car show that looks at the Buick Grand National with over 500rwhp then wants her pic taken with the new Mustang V6 with the boss badges, OOOKKKAAYYYY!?!
Old 12-29-2012 | 10:07 PM
  #11  
kanner1's Avatar
Thread Starter
Staging Lane
 
Joined: Apr 2008
Posts: 63
Likes: 0
From: Savannah, GA
Default

Ohh I feel your pain. Thank g-d my 13 year old is getting with the program. After going to a few X275 & Outlaw Drag radial events with some buddies, he's begging me to procharge it or run a twin turbo set up. This thing was all over the road on the gas as is so I had to upgrade the front & rear suspension. I cant weld & fab up turbo pipes so I'm leaning towards changing cams & probably adding a procharger on here in the next few months.
Attached Thumbnails 67 Cutlass Convertible LY6 Project-img_1327.jpg   67 Cutlass Convertible LY6 Project-img_1328.jpg   67 Cutlass Convertible LY6 Project-img_1329.jpg   67 Cutlass Convertible LY6 Project-img_1330.jpg  
Old 12-29-2012 | 10:16 PM
  #12  
kanner1's Avatar
Thread Starter
Staging Lane
 
Joined: Apr 2008
Posts: 63
Likes: 0
From: Savannah, GA
Default

Kind of sad that even with around 500hp on tap that I get better mileage in the 67 Oldz than my 2011 Toyota Tundra??? Check out the new tag...cant believe that this one slipped through!!! LOL
Attached Thumbnails 67 Cutlass Convertible LY6 Project-img_1408.jpg   67 Cutlass Convertible LY6 Project-img_1409.jpg   67 Cutlass Convertible LY6 Project-img_1116.jpg   67 Cutlass Convertible LY6 Project-img_1460.jpg  
Old 12-29-2012 | 10:51 PM
  #13  
RJDio's Avatar
TECH Enthusiast
 
Joined: Nov 2012
Posts: 555
Likes: 0
From: NearHouston, TX
Default

Funny. my T/A gets horrible gas mileage, lucky to get 15 mpg. Yea my 17 year old drives a 2008 Mustang GT slightly modded and tuned, she is a muscle car fan, but unfortunately the only thing she likes from the 80's is the hair metal.
Old 12-30-2012 | 07:39 AM
  #14  
kanner1's Avatar
Thread Starter
Staging Lane
 
Joined: Apr 2008
Posts: 63
Likes: 0
From: Savannah, GA
Default

Hey... Nothing wrong with some good ol hair metal!!!
Old 12-30-2012 | 08:50 AM
  #15  
garys 68's Avatar
TECH Junkie
10 Year Member
iTrader: (1)
 
Joined: Dec 2007
Posts: 3,713
Likes: 38
From: Camdenton, MO
Default

Nice job. I've got almost 2 years on my 5.3 72 Olds as a daily driver. Absolutely love it.
Old 12-30-2012 | 10:49 AM
  #16  
DC True's Avatar
Registered User
 
Joined: Dec 2012
Posts: 20
Likes: 0
Default

Nice build. Hopefully my cutlass looks similar to this.
Old 12-30-2012 | 05:34 PM
  #17  
Bighatchy's Avatar
Teching In
 
Joined: Dec 2012
Posts: 5
Likes: 0
Default

This makes me miss my 70 cutlass conv I had when I was in high school. It was gold too. Nice job on the swap. Love the wheel choice too

Last edited by Bighatchy; 12-30-2012 at 10:29 PM.
Old 12-30-2012 | 07:56 PM
  #18  
zcrz's Avatar
Teching In
iTrader: (1)
 
Joined: Feb 2010
Posts: 17
Likes: 0
From: Ft.Wayne, IN
Default

Did u run the truck throttle body with ls3 intake? I have an LY6 going in my 69 Camaro next month. Just gathering info! Nice Olds!
Old 12-30-2012 | 09:20 PM
  #19  
kanner1's Avatar
Thread Starter
Staging Lane
 
Joined: Apr 2008
Posts: 63
Likes: 0
From: Savannah, GA
Default

Thanks!! Yes I kept the truck drive by wire with the LS3 intake. Switched my gas pedal to the corvette pedal though, much better design than the truck piece. The guys at PSI set up the new harness to accept the new pedal.



Quick Reply: 67 Cutlass Convertible LY6 Project



All times are GMT -5. The time now is 07:52 AM.