Ly6/t56 in my 79 t/a
#24
Staging Lane
Thread Starter
iTrader: (5)
Join Date: Oct 2012
Location: Norman,OK
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
Thanks!!
Not much new going on, just deciding on throttle body and camshaft at this time. Hopefully it starts getting warm again. This Sunday is supposed to be pretty nice so Ill pull the wiring harness off and start to go to work.
#25
Staging Lane
Thread Starter
iTrader: (5)
Join Date: Oct 2012
Location: Norman,OK
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
Not a whole lot to update. Just updating for the sake of updating. I have been out of town and will be out again next week, but I had a few hours on Sunday and the weather was nice so I got outside and played with the motor a bit. Didnt want to start too much as time was limited, but tinkered a bit.
Started to think a bit about the fuel rails I wanted to run. I have a buddy with some FAST rails that I may run. I really need to find more time and get this thing tore down.
Anywho, wiring harness is off and looks like there was a motor under there.
This mess came off.
Ordered a throttle body the other day and am just kinda waiting for some time to get out there.
Started to think a bit about the fuel rails I wanted to run. I have a buddy with some FAST rails that I may run. I really need to find more time and get this thing tore down.
Anywho, wiring harness is off and looks like there was a motor under there.
This mess came off.
Ordered a throttle body the other day and am just kinda waiting for some time to get out there.
#28
Staging Lane
Thread Starter
iTrader: (5)
Join Date: Oct 2012
Location: Norman,OK
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
I ended up finding a great deal on an Edelbrock 90mm. I was going to go your route, but this one just kinda fell in my lap!
This week is going to be crazy, but I think I can get out there this weekend and make some progress. My taxes arent far off so I suppose Ill use that cash to finish this thing up!
Just so beautiful.
#33
Staging Lane
Thread Starter
iTrader: (5)
Join Date: Oct 2012
Location: Norman,OK
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
well, the plan was to start pulling the motor/trans setup on Sunday, but instead of 55 and clear it was 37 and drizzle..haha
So I am off work this next Thursday. Perhaps I can some things done.
So I am off work this next Thursday. Perhaps I can some things done.
#34
Staging Lane
Thread Starter
iTrader: (5)
Join Date: Oct 2012
Location: Norman,OK
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
Well, had a few hours last night so Photochop (Ryan) came over and we started tearing it apart. Got quite a bit of stuff off for the small amount of time we worked on it. I have some time Thursday and I need to attack the headers, driveshaft, and some misc things. I hope to have it out by 10 AM or so. Gonna start early!! Then head to Houston for the big car show. Here are a few pics from last night and this morning I snapped. Nothing beautiful, but its progress.
Ryan..haha
The neat thing about tearing this down is that much of it is not going back so not much labeling is needed, etc.
It is much more fun
Ryan..haha
The neat thing about tearing this down is that much of it is not going back so not much labeling is needed, etc.
It is much more fun
#36
Staging Lane
Thread Starter
iTrader: (5)
Join Date: Oct 2012
Location: Norman,OK
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
I found some decent deals on f body warehouse and classic industries. I was thinking of getting a new one. I need to get a new hood also, this one is bent like so many others. It also has a few small creases that I do not like. It is just a few things on the long list of to do's....haha
#38
TECH Fanatic
iTrader: (7)
Possible approach for shaker: Throttle Body EFI or Carb. Also could build ductwork for the regular EFI to curve around and pull air from the shaker. I've got the first option set up now (see pic) and plan to move to the second option when I take delivery of my donor LS1 later this month. BTW, I have access to extra shakers if interested - mostly Olds or 301s. Mine required the Olds-style housing, because of a 1/2" offset from center.
#39
Staging Lane
Thread Starter
iTrader: (5)
Join Date: Oct 2012
Location: Norman,OK
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
I bet you it is one of those things that I will change 5 times before I find something I like. Some guys have built stand out of fiberglass and some foam so I am gonna look at them all and see which I feel most comfortable with.
This looks pretty good too.
Possible approach for shaker: Throttle Body EFI or Carb. Also could build ductwork for the regular EFI to curve around and pull air from the shaker. I've got the first option set up now (see pic) and plan to move to the second option when I take delivery of my donor LS1 later this month. BTW, I have access to extra shakers if interested - mostly Olds or 301s. Mine required the Olds-style housing, because of a 1/2" offset from center.
Last edited by REDL1NE; 03-13-2013 at 01:56 PM.
#40
TECH Fanatic
iTrader: (27)
What I am going to do is use the blocker performance kit that mounts a filter into the shaker. Then use my stock shaker base and modify to allow the fresh air to come from the shaker opening.