My 06+ L33 swap came with the DBW plastic pedal, and I need it to be straight and not so curved. Would be easy if it were metal, but this is going in an offroad rig and bolting to plastic on something I can put all my weight worries me when being heavily jarred i the dunes.

Second I had to drop the high amp truck alternator for a smaller camaro on. And of course, this change the connector. Any idea on how to get what's pictured, to what's pictured?

 

You should look into the Lokar DBW pedal.



http://www.chevyhardcore.com/feature...hrottle-pedal/

 

I'd like to steer clear of anything that requires a different throttle body if possible.

 

We have the steel truck pedal in stock (see link). Will require a different tac harness. See link

http://secure.ultracart.com/catalog/.../ACC-1008.html

http://secure.ultracart.com/catalog/.../HAR-1025.html

Jon
Psi

 

The Lokar doesn't require a different throttle body. They have different versions to work with the different throttle bodies.

 

If you've never tried the Lokar DBW pedal, be aware that they ha e very little spring tension. Worse than any factory pedal, it takes almost no effort to push it. Not desirable in my opinion.