Microsquirt LSx Walkthrough
TECH Regular
Joined: Sep 2014
Posts: 433
Likes: 0
Sorry to resurrect an old thread, but I printed it up last year, used it as my guide, and stopped mid project. Getting back into the project, finding where I left off, going over what I completed, and I think I may have identified a mistake...
Isn't the Yellow/blk wire on the factory CPS plug the Sensor Ground?
Shouldn't VR1+ be wired to Dark Blue/Wht?
If so, I need to swap them.
Shouldn't VR1+ be wired to Dark Blue/Wht?
If so, I need to swap them.
Thread Starter
TECH Apprentice
Joined: Apr 2011
Posts: 390
Likes: 0
Sorry to resurrect an old thread, but I printed it up last year, used it as my guide, and stopped mid project. Getting back into the project, finding where I left off, going over what I completed, and I think I may have identified a mistake...
Isn't the Yellow/blk wire on the factory CPS plug the Sensor Ground?
Shouldn't VR1+ be wired to Dark Blue/Wht?
If so, I need to swap them.
Isn't the Yellow/blk wire on the factory CPS plug the Sensor Ground?
Shouldn't VR1+ be wired to Dark Blue/Wht?
If so, I need to swap them.
Thread Starter
TECH Apprentice
Joined: Apr 2011
Posts: 390
Likes: 0
Sorry to resurrect an old thread, but I printed it up last year, used it as my guide, and stopped mid project. Getting back into the project, finding where I left off, going over what I completed, and I think I may have identified a mistake...
Isn't the Yellow/blk wire on the factory CPS plug the Sensor Ground?
Shouldn't VR1+ be wired to Dark Blue/Wht?
If so, I need to swap them.
Isn't the Yellow/blk wire on the factory CPS plug the Sensor Ground?
Shouldn't VR1+ be wired to Dark Blue/Wht?
If so, I need to swap them.
TECH Regular
Joined: Sep 2014
Posts: 433
Likes: 0
Mine was out of a 1999 Silverado.
This is helpful, no matter what color they are.
Last edited by SethU; Apr 8, 2016 at 04:34 PM.
