DBC Throttle Body?
DBC Throttle Body? I need to buy a DBC throttle body for my LS2, and have been looking at the holley 90mm with cable bracket. I like the holley because it comes with the bracket, and that is something I would have to fab up or buy in addition anyway. Just wanted to see if you guys would suggest anything else. Thanks for the time.
I just bought a 4 bolt 92mm from Alper motorsports and mocked it up on my LS3 intake over the weekend. The quality looks good overall, not $400 good but still nice considering it was only $150. My only complaint is that the cam on the throttle body does not clear the truck water pump outlet, but you wouldnt have that problem with a car water pump. Doesnt come with a bracket but I was planning on making one anyways.
I just bought a 4 bolt 92mm from Alper motorsports and mocked it up on my LS3 intake over the weekend. The quality looks good overall, not $400 good but still nice considering it was only $150. My only complaint is that the cam on the throttle body does not clear the truck water pump outlet, but you wouldnt have that problem with a car water pump. Doesnt come with a bracket but I was planning on making one anyways.
Jon
PSI
__________________
Your Source for LSX Conversion Parts!
www.psiconversion.com
Ebay Store
Facebook/psiconversion
Instagram/psiconversion
'Dont Let EFI Pass You By!'
Your Source for LSX Conversion Parts!
www.psiconversion.com
Ebay Store
Facebook/psiconversion
Instagram/psiconversion
'Dont Let EFI Pass You By!'
Trending Topics
The one I ordered did not (costs extra if you want them included). I guess that is another important point for the OP to consider as the TPS and IAC in my case (2001 truck harness/ pcm) are ~$60 and ~$35 from rock auto. If you dont already have those parts on hand then that needs to factored into the price.
In my case I assumed the TPS off 2003 DBW truck intake was the same as the 2001 DBC truck and it was not, and the DBW throttle body does not use an IAC, so I will need to order them. The DBW TPS does physically bolt on to the Alper MS throttle body. For me its not worth $35 trying to mix and match sensors from different applications and change the connector on my harness.
In my case I assumed the TPS off 2003 DBW truck intake was the same as the 2001 DBC truck and it was not, and the DBW throttle body does not use an IAC, so I will need to order them. The DBW TPS does physically bolt on to the Alper MS throttle body. For me its not worth $35 trying to mix and match sensors from different applications and change the connector on my harness.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Correct, you can buy the Alper throttle body with sensors included as well. The price difference was cheaper than I could get the sensors for seperately. Most of the throttle bodies out there can be purchased with or without the sensors. I didnt mean it as a gripe, I am happy with the price and quality.
