LSA into gen III 'maro

Reply Subscribe

Thread Tools

Search this Thread

Mar 8, 2013 | 12:23 AM

machinistone

Thread Starter

Banned

Joined: Aug 2006

Posts: 326

Likes: 0

From: North Bay, CA

LSA into gen III 'maro

Anybody done one yet and know if it will clear the stock hood?

LS3 with Edelbrock E-Force blower?

Mar 8, 2013 | 12:39 PM

bonecrrusher

TECH Enthusiast

iTrader: (1)

Joined: Jan 2006

Posts: 581

Likes: 0

From: Charlotte, NC

LSA and the Eforce blower are different animals.

I would go with the Eforce - they are meant to fit under the hood of a Vette.

The problem you will run into is which accessory drive you choose.

I am not sure the Vette drive will fit in a Third gen w/out problem.s...

Mar 9, 2013 | 12:46 AM

machinistone

Thread Starter

Banned

Joined: Aug 2006

Posts: 326

Likes: 0

From: North Bay, CA

Quote:

Originally Posted by bonecrrusher

To give a little better background, we're doing an LS conversion into a customer's gen III, plan was to go with an E-Rod LS3 and put the Edelbrock unit on top because both have EO numbers for California. This project has been on hold for a while, but now as we're getting started back up we have found that the LSA motor now is offered in the E-Rod package and if possible would like to do that as long as it will fit under the stock hood (customer stipulation).

Mar 12, 2013 | 10:12 PM

bonecrrusher

TECH Enthusiast

iTrader: (1)

Joined: Jan 2006

Posts: 581

Likes: 0

From: Charlotte, NC

Check out Third-gen.org or whatever site there is - or search on here for hood clearance.

I am not sure how much taller the blower and intercooler hat is then the LSx plastic manifold.

Reply Subscribe