When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Like the title says I'm putting an TBSS intake and TB on my engine, the TB has 6 pins and the harness, 04 5.3 harness has 8 pins. Does anybody know which wires I need to re-pin the connector or where I can get an adapter harness?
Last edited by LS79CAMARO; 03-15-2013 at 06:39 PM.
Reason: change
Excellent, thank you for the info. Do you sell the 6 pin connector I need? I found the connector in your eBay store. Can you sell me the relay/fuse panel and 6 pin connector please?
Last edited by LS79CAMARO; 03-16-2013 at 10:37 AM.
Bare connector works, this way I can pull the wires from my 8 pin harness and use the 6 pin. How about the relay/fuse panel you use in your LS harness, I am interested in that too. You can PM me if you don't want to put it on here
I have an 05 harness with the 8 pin tb right now. It runs and drives fine, just looking to upgrade to the larger 90mm 6 pin tb along with an edelbrock intake. What else is required for this swap? Tb, tac, and pedal or can I use my current truck pedal and tac module?
My understanding is/was that you need this. Unfortunately my car has spent the last year and a half in the shop getting done work done and hasn't been fired up yet. Hope that helps.
I just got an email from snake eater. They used to make a retrofit throttle body but “it wasn’t popular” so they quit making it
Originally Posted by SheepDog209
My understanding is/was that you need this. Unfortunately my car has spent the last year and a half in the shop getting done work done and hasn't been fired up yet. Hope that helps.